Carta De Convenio Familiar

PERRY JOHNSON LABORATORY
ACCREDITATION, INC.
602.00

Certificate of Accreditation
Perry Johnson Laboratory Accreditation, Inc., has assessed the Laboratory of:
Calmet Industrial, S.A. de C.V.
Lázaro Cárdenas # 1308, Col. Niño Artillero
Monterrey, Nuevo León 64280

(Hereinafter called the Organization) and hereby declares that Organization is accredited in accordance with the recognizedInternational Standard:

ISO/IEC 17025:2005
This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system
(as outlined by the joint ISO-ILAC-IAF Communiqué dated January 2009):
Dimensional, Electrical, Thermodynamic, Weighing Device and Mechanical Calibration
(As detailed in the supplement)

Such testing and/orcalibration services shall only be offered at or from the address given above. This Accreditation is granted
subject to the system rules governing the Accreditation referred to above, and the Organization hereby covenants with the
Accreditation body's duty to observe and comply with the said rules.
For PJLA:

The validity of this certificate is mandated through ongoing surveillance.
Tracy SzerszenPresident/Operations Manager
Perry Johnson Laboratory
Accreditation, Inc. (PJLA)
755 W. Big Beaver, Suite 1325
Troy, Michigan 48084

Initial Accreditation Date:

Issue Date:

Expiration Date:

February 11, 2011

February 11, 2011

September 09, 2015

Accreditation No:

Certificate No:

Page No:

45294

L11-55

Page 1 of 12

Certificate of Accreditation: SupplementCalmet Industrial, S.A. de C.V.
Lazaro Cardenas # 1308, Col. Niño Artillero
Monterrey, Nuevo León 64280

Accreditation is granted to this facility to perform the following calibrations:
Dimensional
MEASURED INSTRUMENT,
QUANTITY OR GAUGE

RANGE
(AND SPECIFICATION
WHERE APPROPRIATE)

CALIBRATION
AND MEASUREMENT
CAPABILITY EXPRESSED
AS AN UNCERTAINTY (±)

CALIBRATION
EQUIPMENT ANDREFERENCE
STANDARDS USED

Outside Micrometers

1.0mm to 1 000 mm

(2.05 + 1.78 10-2L) µm

Calipers

1.0 mm to 1 000 mm

(23.86 +1.65 x 10-2L) µm

Indicator

0.01 mm to 50.8 mm

2.8 µm

Rules

0.000 1 mm to 1 000 mm

4.1 mm

Surface Plates
Repeat Measurement

50.8 µm

1.9 µm

Optical Comparator
Length

X: 200 mm
Y: 200 mm
0° to 90°

18 µm
18 µm
0.38º

JISB 7184 Standard Glass
Scale

1.0 mm to 1 000 mm

(11.5 + 5.01 x 10-2L) µm

Pin gages

0.254 mm to 76.2 mm

1.4 µm

JIS B 7517
Gage Block Sets
ASME B 89 1.5
Micrometer

Thread Plug Gage
Major Diameter
Ultrasonic Thickness

0-80 to 4-12

2.8 µm

0.022 mm to 1.977 mm

2 µm

Thread Plug Gage
Pitch Diameter
Measuring Tape

0-80 to 4-12

5.4 µm

0.001 m to 10 m(1.14 + 1.6 x 10-4L) mm

Radius Gage

0.4 mm to 25.4 mm

5.0 µm

Optical Comparator
Angularity
Height Gage

Issued:

2/11

This supplement is in conjunction with certificate # L11-55

NMX-CH-099-IMNC-2005
Gage Block Sets
NMX-CH-002-IMNC-2004
Gage Block Sets
NMX-CH-36, JIS B-7503
Dial Gauge Calibration
Tester
JIS B 7516 Standard Steel
Ruler, Microscope
JIS B 7513 Repeat–Ometer

Angle Block

ANSI/ASME B1.2
Conventional Micrometer
ASTM E 797 Thickness
Gages
ANSI/ASME B1.2 Wires
and digital Micrometer
JIS B 7512 Standard Steel
Ruler
ISO-2769-2 Optical
Comparator

Page 2 of 12

Certificate of Accreditation: Supplement
Calmet Industrial, S.A. de C.V.
Lazaro Cardenas # 1308, Col. Niño Artillero
Monterrey, Nuevo León 64280

Accreditation is grantedto this facility to perform the following calibrations:
Dimensional
MEASURED INSTRUMENT,
QUANTITY OR GAUGE

System of Vision

Protector Angle Meter

RANGE
(AND SPECIFICATION
WHERE APPROPRIATE)

CALIBRATION
AND MEASUREMENT
CAPABILITY EXPRESSED
AS AN UNCERTAINTY (±)

X: 200 mm
Y: 200 mm

18 µm
18 µm

Angle 15 º to 90 º
0º to 90º

0.38º
0.38º

CALIBRATION
EQUIPMENT...