Catalogo equipo policial usa y canada

LESS LETHAL SOLUTIONS
Less Lethal Solutions by TASER TASER™ TECHNOLOGY DEVICE FIRES TWO PROBES, TRANSMITTING ENERGY THROUGH THE WIRES INTO THE NERVOUS SYSTEM
TASER™ devices fire two probes up to a distance of 35 feet (10.7 meters), transmitting energy through the wires into the central nervous system of the target causing immediate involuntary incapacitation. Previous-generation electroniccontrol devices use a simple high-energy, "blunt" pulse to penetrate through the skin and clothing barriers that serve as protective armor around the body. Well over 90% of the energy is lost in the process of barrier penetration. For this reason, high power levels (26 watts) are required to generate a neuromuscular incapacitation (NMI) effect as opposed to a simple pain response, requiring largebatteries that add weight and size to the M26 weapon (18 ounces total). The 4th generation and patented Shaped Pulse™ technology in the TASER X26 uses a highly refined two-phase energy pulse that concentrates a small portion of energy to first penetrate the barrier, while the majority of electrical charge is held in reserve, flowing freely through the barrier once the circuit is established. Thefirst phase, called the "Arc Phase," is optimized to generate a very high voltage to penetrate clothing, skin or other barriers. The Arc Phase is a high-voltage, shortduration pulse that can arc through up to two inches of clothing or barriers. Once the arc is created, the air in the arc is ionized and becomes a low impedance electrical conductor that conducts the second pulse phase into the body.The second phase of the Shaped Pulse is the simulation phase, or "Stim Phase." The Stim Phase does not have to arc across a barrier, since this was accomplished by the Arc Phase. The Stim phase only has to flow across the highly conductive arc from the Arc Phase. Hence, the Stim Phase is optimized to provide maximum incapacitation for a human target while operating at super-efficient powerlevels. The timing of these phases is so fast that to most electronic instrumentation, and all human observers, the Shaped Pulse appears as just one output pulse (arc). The result of Shaped Pulse NMI technology is a high-performance, highly efficient electronic control device that is 60% smaller, 60% lighter, and consumes 1/5th the power of its predecessor.

Size comparison of TASER X26 and ADVANCEDTASER M26

BLUNT PULSE TECHNOLOGY High energy pulse "brute force" barrier penetration. Over 90% of the energy is lost during barrier penetration.

SHAPED PULSE™ TECHNOLOGY Sharp, high voltage leading edge penetrates barrier. Almost 100% of the energy penetrates the barrier to incapacitate the target.

Head Office: 1-866-652-2877

West: (604) 526-1631

Prairies: 1-866-652-2877

East:1-877-993-9968

69

LESS LETHAL SOLUTIONS
Less Lethal Solutions by TASER TASER™ X26E WITH INTEGRATED LASER SIGHT, LOW-DENSITY LIGHTS, DIGITAL POWER MAGAZINE (DPM), DATAPORT DOWNLOAD CAPABILITY
TASER X26E WITH DPM & TASER EXOSKELETON HOLSTER

A

B

C
Models #26000 and #26011 shown with 25" (7.6m) XP TASER Cartridge Sold Separately The TASER X26 is a software upgradeable electroniccontrol device manufactured by TASER International, Inc. Electronic Control Devices (ECD) use propelled wires or direct contact to conduct energy to affect the sensory and motor functions of the nervous system. The TASER X26 uses a replaceable cartridge containing compressed nitrogen to deploy two small probes that are attached to the TASER X26 by insulated conductive wires. The TASER X26 transmitspowerful electrical pulses along the wires and into the body affecting the sensory and motor functions of the peripheral nervous system. The cartridges are available with various wire lengths from 15' to 35' (4.2 meters to 10.6 meters). The energy can penetrate up to two inches of clothing. ITEM DESCRIPTION Black / Silver Grip Plates / TASER eXoskeleton Holster Black / Black Grip Plates / TASER...