Catalogo Micro Barrier Crow Csb 200

ELECTRONIC ENGINEERING INC.

CSB - 200
Outdoor Detector 660’ x 17’ Range

Microwave Barrier

INSTALLATION INSTRUCTIONS & USER MANUAL

P/N 7111267 Rev. 1.0 Y.S/A.Y
1

The CSB-200 is a bi-station microwave detector for long range outdoor applications. It comprises of a transmitter (T) and receiver (R) which, when mounted facing each other, create a perimeter protection with coverage ofup to 200m. The dimensions of the detection area vary according to the distance between the two units and the sensitivity calibration. The CSB-200 Microwave barrier is an advanced detection system utilizing state of the art Microwave technology eliminating false alarms while maintaining high security standards for the detection of human intruders into a protected area. The CSB-200 is designed toprotect large areas and can easily be installed on any type of fence or pole in order to provide a solid barrier protection and block all perimeter activities; this barrier rejects interferences of birds and small animals due to its original method of false alarm elimination. Several CSB-200 systems can be combined in order to provide a complete perimeter protection with unlimited space or shape.The CSB-200 is designed for continuous round-the-clock operation and keeps its characteristics within a wide temperature range of -40°C up to +60°C and a relative humidity of up to 98%. Features: • Detection Range: • Operating Temperature: • Power Input: Up to 200m -40°F to +140°F 12 ~ 30 Vdc

• Detect human intruders walking, running or crawling. • Quick and easy installation on pole, fence orwall. • No maintenance required. • High RFI/EMI Immunity. • Protection against: Power supply failure, direct sunlight, wind up to 30 m/sec, snow and rain, small animals, ground precipitation, snow and grass up to 0.5m, removing the top cover, housing destruction, electromagnetic masking of the receiver.
2

SELECTING MOUNTING LOCATION The installation of the CSB-200 requires that thetransmitter and the receiver face each other, so that the two antennas may be correctly aligned. The two units must be positioned in direct line at the edge of the area. Local conditions of the protected zone must be free from obstacles like walls, fences, trees and ditches or other microwave detectors and systems. In order to ensure suitable operation of the CSB-200, type of ground should be one of thefollowing: Asphalt, Cement, Soil, Clay, Gravel or Grass (mown). Avoid the following locations. Avoid installation of CSB-200 on the following type of ground: Thick vegetation, Grass (unmown), Water, Sand and Metal. The ground must not have movable parts near the sensitive zone, any grassy areas must be frequently mown, there should not be any flowing water, especially longitudinally, ground wherestructural features may be changed. The installation site should satisfy the following requirements (see fig. 1): • The surface of the site should be leveled with a maximum slope angle of 15°. • No obstacles as bushes or group of trees or walls, within a distance of 2.5m from the centerline between two units. • Depth of snow on the ground should not be more than 0.5m. • Height of a grass on theground should not exceed 0.3m. It is important to mow the grass regularly to avoid its movement interfering with the microwave signal.

Maximum length of protection zone = 200 m Maximum width of protection zone = 5 m Maximum height of protection zone = 1.8 m

Installation Height 1 ~ 1.5 m

Maximum depth of snow on the ground = 0.5m

Maximum height of grass on the ground = 0.3m

Dead Zone2.5~3 m

Fig.1. Installation and Protection zone
3

MOUNTING THE DETECTOR Installation on Pole Use metal or cement poles with a diameter of 90 ~ 100mm as the support. It is allowed to install two units on a single support; the two units must be identical (Two transmitters or two receivers). Installation height of receiver and transmitter units should be in a way that the bottom surface of the...