Ccna ios configuration

IOS Switching Initial Configuration

BCMSN LAB 1

BCMSN LABS
Objective

Lab 1: IOS Switching Initial Configuration
Become familiar with the lab access menu, learn the lab topology, and provide the switches with an initial configuration.

Lab Topology
For this lab, your network design will include two pods of devices. You will be responsible for configuring the devices in both pods. Thedevices on the left side of the topology are in Pod 1. The devices on the right side of the topology are in Pod 2. P1PC1 and P2PC2 are PC workstations. P1ASW1 and P2ASW2 are access-layer switches. P1DSW1 and P2DSW2 are distribution-layer switches. The access and distribution layers are two of the three layers in the Cisco three-layer hierarchical network model, which also includes the core layer. TheTopology diagram below represents the NetMap in the Simulator. To access each of the devices from within the Simulator, select the device name from the appropriate menu in the Simulator. For example, to access P1ASW1, click the eSwitches button and select P1ASW1 from the drop-down menu.

P1PC1

172.16.1.1

P2PC2

172.16.2.2

Fa0/5

Fa0/5

P1ASW1
Fa0/1 Fa0/2 Fa0/3 Fa0/4172.16.1.10
Fa0/1

P2ASW2
Fa0/2 Fa0/3

172.16.1.2
Fa0/4

Fa0/1

Fa0/2

Fa0/3

Fa0/4 Fa0/11 Fa0/11

Fa0/1

Fa0/2

Fa0/3

Fa0/4

P1DSW1
172.16.1.100

Fa0/12

Fa0/12

P2DSW2
172.16.1.200

Boson NetSim for CCNP Lab Manual

141

BCMSN LAB 1
Command Summary
Command

IOS Switching Initial Configuration

Description
enters global configuration mode backs up the activeconfiguration to NVRAM assigns a description to an interface sets the duplex configuration for an interface enters the privileged EXEC mode sets the timeout for the EXEC session to never logout exits the current mode sets the host name enters interface configuration mode selects a range of interfaces to configure enters interface configuration mode, and enters the VLAN to which the IP information isassigned specifies the line to be configured enables logging messages to the console port enables synchronous logging of messages enables password checking disables IP Domain Name System host_name translation specifies the password that is required for a user to log in sends an ICMP echo request enables log and debugging time stamps

configure terminal copy running-config startup-config descriptiondescription_text duplex duplex_mode enable password exec-timeout 0 0 exit hostname name interface fastethernet slot/port interface range fastethernet slot/starting_port – ending_port interface vlan 1 ip address ip_address line [aux | console | vty ] beginning_line_ number [ending_line_number] logging console logging synchronous login no ip domain-lookup password password ping ip_address servicetimestamps [log | debug] uptime service timestamps [log | debug] datetime [msec] [localtime] [show-timezone] show cdp neighbor {detail} show interfaces fastethernet mod/port switchport show interfaces status show running-config shutdown; no shutdown speed speed switchport mode access telnet ip_address

displays the cdp neighbor entries displays switchport information displays the line status of allinterfaces displays the active configuration disables an interface; enables an interface sets the line speed sets the trunking mode to access unconditionally starts the terminal emulation program from a PC, router, or switch that permits you to access devices remotely over the network

142

Boson NetSim for CCNP Lab Manual

IOS Switching Initial Configuration

BCMSN LAB 1

Lab Tasks
Task 1:Discover Lab Topology and Make Port Assignments
Complete the following diagram with the appropriate port assignments for the devices that you will be configuring. Use CDP to gather the necessary information.

P1PC1

P2PC2

P1ASW1

P2ASW2

P1DSW1
Task 2: Reset and Configure Lab Devices

P2DSW2

In this lab, you will return all of the devices to a default configuration and apply a...