Ccna4
PT Activity 1.5.1: Packet Tracer Skills Integration Challenge
Topology Diagram
All contents are Copyright© 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 6
CCNA Exploration Accessing the WAN: Introduction to WANs
PT Activity 1.5.1: Packet Tracer Skills Integration Challenge
Addressing Table
Device ISP Interface S0/0/1 Fa0/0 S0/0/0 S0/0/1 S0/0/0 Fa0/0.1 BRANCH Fa0/0.10 Fa0/0.20 Fa0/0.30 Fa0/0.99 S1 S2 S3 PC1 PC2 PC3 Web Server VLAN99 VLAN 99 VLAN 99 NIC NIC NIC NIC IP Address 209.165.200.225 209.165.201.1 10.1.1.2 209.165.200.226 10.1.1.1 172.17.1.1 172.17.10.1 172.17.20.1 172.17.30.1 172.17.99.1 172.17.99.11 172.17.99.12 172.17.99.13 172.17.10.21 172.17.20.22 172.17.30.23 209.165.201.2 Subnet Mask 255.255.255.252 255.255.255.252 255.255.255.252 255.255.255.252 255.255.255.252 255.255.255.0 255.255.255.0 255.255.255.0255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.252 Default Gateway N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 172.17.99.1 172.17.99.1 172.17.99.1 172.17.10.1 172.17.20.1 172.17.30.1 209.165.201.1
CENTRAL
Learning Objectives
• • • • • • • • • • Configure static and default routing Add and connect the BRANCH router Add andconnect the switches Add and connect the PCs Perform basic device configuration Configure OSPF routing Configure STP Configure VTP Configure VLANs Verify end-to-end connectivity
Introduction
This activity covers many of the skills you acquired in the first three Exploration courses. Skills include building a network, applying an addressing scheme, configuring routing, VLANs, STP and VTP, andtesting connectivity. You should review those skills before proceeding. In addition, this activity provides you an opportunity to review the basics of the Packet Tracer program. Packet Tracer is integrated
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 6
CCNA Exploration Accessing the WAN: Introduction to WANsPT Activity 1.5.1: Packet Tracer Skills Integration Challenge
throughout this course. You must know how to navigate the Packet Tracer environment to complete this course. Use the tutorials if you need a review of Packet Tracer fundamentals. The tutorials are located in the Packet Tracer Help menu. Note: There are over 150 assessed items in this activity. Therefore, you may not see thecompletion percentage increase every time you enter a command. The user EXEC password is cisco and the privileged EXEC password is class.
Task 1: Configure Static and Default Routing
Step 1. Configure static routing from ISP to CENTRAL. Use the topology diagram to configure ISP with static routes to all networks. Each network is reachable via S0/0/1 from ISP. Use the exit interface parameter toconfigure static routes to the following networks: • • • • • • 10.1.1.0/30 172.17.1.0/24 172.17.10.0/24 172.17.20.0/24 172.17.30.0/24 172.17.99.0/24
Step 2. Configure default routing from CENTRAL to ISP. Configure a default route on CENTRAL using the exit interface parameter to send all default traffic to ISP. Step 3. Test connectivity to the Web Server. CENTRAL should now be able to successfullyping the Web Server at 209.165.201.2. Step 4. Check results. Your completion percentage should be 4%. If not, click Check Results to see which required components are not yet completed.
Task 2: Add and Connect the BRANCH Router
Step 1. Add the BRANCH router. Click Custom Made Devices and add an 1841 router to the topology. Use the Config tab to change the Display Name and Hostname to...
Regístrate para leer el documento completo.