Chef

INSTRUCTION MANUAL

BEFORE INSTALLATION

1 2 3 4 5 6 7

AP-12

WIRELESS ACCESS POINT

OBTAINING AN IP ADDRESS FROM THE DHCP SERVER FIXED IP ADDRESS SETTING AP-12 MANAGER SETTING EXAMPLES IP CONFIGURATION REFERENCES

INTRODUCTION
IMPORTANT
ii

IMPORTANT
When connecting the AP-12 to a bridging type modem (or in bridging mode) directly, a global IP address may be assigned to theAP-12 from the modem, according to the modem settings. When a global IP address is assigned to the AP-12, an illegal operator, such as a cracker, a hacker, may access it. To avoid such access, connect a router between the modem and the AP-12. The bridge type modem assigns a global IP address to the connected PC (only one). The router type modem assigns a private IP address (e.g.192.168.x.x) to theconnected PCs via the HUB by the built-in routing function. The AP-12 can be connected to a router type modem directly. Contact your Internet Service Provider (ISP) if you do not know your modem type.

About exchanging the AP-12 or the PC connected to the AP-12. The AP-12 memorizes the communication settings between the AP12 and the connected PC. Thus, if the AP-12 and/or the PC connected to itchanged, communication may fail. In such case, turn the AP-12 power OFF. After waiting a few seconds, turn the power ON again.

INTRODUCTION
FOREWORD
Thank you for purchasing the Icom Wireless Access point AP-12. This wireless access point is provided with the functions necessary for supporting a wireless LAN. This manual is designed to help you use the product to its fullest potential. Readthis manual carefully before using the product.

TRADEMARK CREDITS
Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United states, the United Kingdom, Germany, France, Spain, Russia and/or other countries. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. The screen shots that appear in this manualare used with permission of Microsoft Corporation. Other product and company names mentioned herein are trademarks or registered trademarks of their respective owners.
iii

INTRODUCTION
INTRODUCTION
iv

FEATURES
" Up to 11 Mbps data transmission rate with automatic fallback function (11/5.5/2/1 Mbps). " The supplied utility software, [AP-12 Manager] allows you simple setup of the systemwith a step-by-step tutorial. Windows XP, Windows Me, Windows 98SE, Windows 98, Windows 2000 are supported. " The diversity antenna is built into the compact body to provide stable communication. " Versatile operating modes for Access Point mode, Bridge mode A (Peer-to-Peer), Bridge mode B (Client mode), and Bridge mode C (Multi-site). A roaming function is also available while in Access Point mode.It provides full mobility and seamless network access from anywhere within the area for the connected clients. " The DHCP client function is available to automatically obtain the network configuration such as the IP address (This is not activated in Bridge mode B mode operation). " Data can be protected with high-level security function such as 128/64-bit WEP (Wired Equivalent Privacy) encryptionand MAC address registration. " AP-12 uses a direct spread-spectrum communication system which ensures stabilized communication even under influence of noise and interference.

INTRODUCTION
FCC INFORMATION

AP-12
Tested to comply with FCC standards

FOR HOME OR OFFICE USE

CAUTION: Changes or modifications not expressly approved by Icom Inc. could void the user’s authority to operatethis Access Point.
Class B digital device users; This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed...