Ciencia En Acción

1
GB

Euroset 5020 Quick Guide
9 10 11 12 1

8 7 6

No memory content Telephone locked When trying to connect: telephone locked zzzz 0–9 Phone number With tone dialling: n – * key pressed – # key pressed With additional services from public network providers: New call in calls list † (Flashing) A new message has arrived ë Call waiting ™ Call forwarding immediately ˜ Call forwarding on noreply — Call forwarding when busy š Anonymous call on

z

{

|

Safety precautions
5 4 3 2

Keys
1 Repertory keys 2 Redial key 3 Recall key 4 Mute key 5 Shift key 6 Quiet key 7 Loudspeaker key (handsfree) 8 Loud key 9 Set key 10 Up key 11 Down key 12 OK key (dial number displayed)

Display symbols

P
‡

---

y

è
o u P

‰

In setting mode Shift key pressed Ready for useMicrophone off Baby Call (direct call) number set (Flashing) No power supply Entry mark when setting (e.g. volume) Recall key pressed Pause

When installing, connecting and operating the telephone, always observe the following precautions: ◆ Only use the plugs and leads supplied. ◆ Only use the adapter supplied. ◆ Only connect the connecting lead to the socket/jack provided for that purpose. ◆Only connect approved accessories. ◆ Arrange the connecting lead where it will not cause accidents. ◆ Position the telephone on a non-slip surface. ◆ For your safety and protection, the telephone must not be used in bath or shower rooms (wet locations). The telephone is not splash proof. ◆ Never expose the telephone to sources of heat, direct sunlight or other electrical devices. ◆ Protect yourtelephone from moisture, dust, corrosive liquids and vapours. ◆ Never open up the telephone yourself. ◆ Do not touch the plug contact with pointed or metallic objects. ◆ Do not carry the telephone by the leads. ◆ If you give your Euroset 5020 to someone else, make sure you also give them the user guide.

2
GB

Preparing the telephone for use
Recommended installation of telephone
◆ Do notexpose the telephone to direct sunlight or other
sources of heat.

Purpose of connecting to the mains using the adapter
If your telephone is connected to the mains using the adapter, you can select and save all settings without lifting the handset (or without pressing the loud-speaker button). Without this mains supply, settings must be selected and saved with the handset lifted (or afterpressing the loudspeaker button). Using the last number redial list and Calling Line Identification and selecting the phone number are only possible with main supply connection.

◆ Operate at temperatures between +5°C and +40°C. ◆ Maintain a distance of at least one metre between the
telephone and radio equipment, e.g. wireless telephones, wireless pagers or TV sets. Otherwise, telephone communicationcould be impaired. ◆ Do not install the telephone in dusty areas as this can shorten the service life of the telephone. ◆ To clean, wipe with a moist or antistatic cloth only, never with a dry cloth (risk of electrostatic charging and discharge) or harsh cleaning agent. ◆ Furniture lacquer and polish can be damaged by contact with parts of the unit (e.g. device feet).

Setting the internalclock ?3 Initiate function.
o ?

The current set time is displayed in 24-hour mode (default setting: 00:00). Enter the correct time in hours and minutes (24-hour mode). Press the Set key.

Connecting
Insert the short end of the coiled handset cord in the socket provided in the handset and the long end in the socket marked with an a on the underside of the device. Plug the phone cord into theoutlet on the wall and the other end into the socket marked with a Y on the underside of the device. Plug the adapter into the socket identified with " and connect to the mains socket. Then your telephone is ready to use.

Making calls
Dialling a number co Lift handset, dial number.
or ...

digit) and press the OK key. After 2 seconds the number is dialled. Lift the handset if you want to...