Ciencia

The PROFIBUS adapter features the following:
• The adapter is mounted in the PowerFlex drive. It receives the
required power from the drive.
• Switches let you set a node address before applyingpower to the
PowerFlex drive. Alternatively, you can disable the switches and use
parameters to configure this feature.
• Captive screws are used to secure the adapter to the drive.
• A number ofconfiguration tools can be used to configure the adapter
and connected drive. The tools include the PowerFlex HIM on the
drive, or drive-configuration software such as DriveExplorer
(version 2.01 orhigher) or DriveExecutive (version 1.01 or higher).
• Status indicators report the status of the drive, adapter, and network.
They are visible both when the cover is opened and when it is closed.• I/O, including Logic Command/Reference and up to four pairs of
Datalinks, may be configured for your application using a parameter.
• Explicit messages are supported using the Parameter Protocol.
•User-defined fault actions determine how the adapter and PowerFlex
drive respond to communication disruptions on the network and
controllers in idle mode.
The PROFIBUS adapter is compatible withAllen-Bradley PowerFlex
drives and other products that support DPI. DPI is a second generation
peripheral communication interface and is a functional enhancement to
SCANport. At the time ofpublication, compatible products include:
• PowerFlex 70 drives
• PowerFlex 700 drives
• PowerFlex 7000 drives
Features
Compatible Products
Getting Started 1-3
Equipment Shipped with the Adapter
Whenyou unpack the adapter, verify that the package includes:
User-Supplied Equipment
To install and configure the PROFIBUS adapter, you must supply:
Required Equipment
? One PROFIBUS adapter
? A2.54 cm (1 in.) and a 15.24 cm (6 in.) Internal Interface cable
(only one cable is needed to connect the adapter to the drive)
? One grounding wrist strap
? One floppy disc with GSD file
? This...