Cilindros flat

Flat Cylinders
Flat-I Square Flat-I Flat-II Square Flat-II FO2.F03.F04 (multiple power) FOP (multiple position) Flat Accessories EF I Cylinders EF 2 Cylinders
NEW

2.3-2.11 2.12-2.18 2.19-2.23 2.24-2.28 2.29-2.34 2.35-2.41 2.42-2.43 2.44-2.57 2.58-2.67 2.68-2.77 2.78 2.79-2.82 2.83-2.84 2.85-2.114 2.115-2.123 2.124 2.125 2.126 Flat Cylinders

EFP and EFQ Cylinders Stopper Cylinders TwistClamp Cylinders Extruded Flat Lift Table Twin Bore Cylinders Narrow Profile Air Table Actuators Low Profile Air Table Actuators Diaphragm Cylinders Miniature “Cube” Cylinders

Bimba FLAT-I

BIMBA FLAT-1 FITS RIGHT IN!
Flat Cylinders

BIMBA Flat-1 cylinders were designed with space savings in mind. Six models offer six ways to save space. Flat-1 – The original round cylinder. Square Flat-1 –For additional mounting variations. Flat-II – The dual piston rod, nonrotating cylinder. Square Flat-II – The dual piston rod, square nonrotating cylinder. FO2, 3, 4 – Force multiplying cylinders. FOP – For three positions.

• 303 stainless steel piston rod • Oil impregnated bronze rod bushing • Anodized aluminum alloy heads • Buna N “O” ring rod seal • 304 stainless cylinder body • Buna N “O”ring piston seal

Space savings without sacrificing quality means better performance and longer cylinder life. Flat-1 offers these quality features: • 304 stainless steel cylinder body with a mirror finish I.D. Stainless steel fights corrosion and scoring from dirt particles. The result is longer piston seal life. • Oil impregnated bronze rod bushing is standard in all models. • Ground andpolished 303 stainless steel piston rod. • High strength piston to rod connection. • Precision machined, anodized aluminum alloy heads.

Approximate Power Factors (For all models except FO2, 3, 4)
9/16" (02) 3/4" (04) 1-1/16" (09) 1-1/2" (17) 2" (31) 2-1/2" (50) 3" (70) 4" (125) = = = = = = = = 0.25 0.4 0.9 1.7 3.1 5.0 7.0 12.5 For example, a 3/4" bore model FO-041 will exert a force of approximately0.4 times the air line pressure.

2.2

Bimba FLAT-1
• • • • • • • • Body — 304 Stainless Steel Heads — Anodized Aluminum Alloy Piston Rod — Ground and Polished 303 Stainless Steel Seals — Buna N (High temperature seals optional) Rod Bushing — Oil Impregnated Bronze Spring Forces — See page 2.10 Pressure Rating — 200 PSI Maximum (Air only) Temperature Rating — From -20˚F to +150˚F (-25˚C to+65˚C) Buna N seals with a temperature range of -20˚F to +150˚F (-25˚C to +65˚C) are standard in all Bimba air cylinders. Fluoroelastomer seals rated for higher temperature applications are available. If cylinders are operated below 0˚F (-18˚C) for extended time periods, special modifications may be required. Special seal materials are available upon request.
Flat-1/ Square Flat-1 Flat-II/ SquareFlat-II F02, F03, F04
(multiple power)

How to Order
The Model Number for all Flat-1 cylinders consists of three alphanumeric clusters. These designate type, bore size and stroke length, and mounting and special options. Please refer to the charts below for an example of Model Number FO-170.125-1V. This is a double acting, 1-1/2" bore, 1/8" stroke, pivot mount cylinder with high temperatureoption.
TYPE FO – Double Acting, Single End Rod FOD – Double Acting, Double End Rod FOR – Reverse Acting FOS – Single Acting BORE SIZE 02 – 9/16" 31 – 2" 04 – 3/4" 50 – 2-1/2" 09 – 1-1/16" 70 – 3" 17 – 1-1/2" 125 – 4" STROKE LENGTH 0.125 - 1/8" 0.25 - 1/4" 0.375 - 3/8" ETC.

(multiple position)

F0P

Flat Accessories EF1/EF2

FO-170.125-1 V
MOUNTING OPTIONS (Enter in numeric order) NoNumber - Basic model (Standard counterbored mounting holes) 1 - Pivot mount 1N - Pivot mount 90˚ from standard 2 - Trunnion mount, both ends1 2F - Front trunnion mount1 2R - Rear trunnion mount1 3 - Threaded mounting holes, both ends 3F - Threaded mounting holes, front 3R - Threaded mounting holes, rear 4 - Screw clearance holes, both ends2 4F - Screw clearance holes, front2 4R - Screw clearance...