Codigos De Falla Thermoking

Num 00 | Description No Alarms Exist | Operator Action No action required. |
01 | Microprocessor Power Up Reset | No action required. |
02 | Check Evaporator Coil Sensor | Manually monitor load temperature. Report this alarm at the end of the day. |
03 | Check Return Air Sensor | Manually monitor load temperature. Report this alarm at the end of the day. |
04 05 | CheckDischarge Air Sensor Check Ambient Temp Sensor | Manually monitor load temperature. Report this alarm at the end of the day. Report this alarm at the end of the day. |
06 | Check Coolant Temp Sensor | Report this alarm at the end of the day. |
07 | Check Engine RPM Sensor | Report this alarm at the end of the day. |
08 | Unit Running on Coil Sensor | Manually monitor load temperature.Report this alarm at the end of the day. |
09* | High Evaporator Temperature | If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. |
10* | High Discharge Pressure (or Temperature) | If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. |
11 | Unit Controlling onAlternate Sensor | Manually monitor load temperature. Report this alarm at the end of the day. |
12 | Sensor or Digital Input Shutdown | The unit (or zone) is no longer able to operate and has been shut down. Repair immediately. |
13 | Sensor Check | Manually monitor load temperature. Report this alarm at the end of the day. |
14 | Defrost Terminate by Time | Report this alarm at theend of the day. |
15 | Check Glow Plugs or Intake Air Heater | If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. |
16 | Manual Start Not Completed | Report this alarm at the end of the day. |
17* | Engine Failed to Crank | If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at theend of the day. |
18* | High Engine Coolant Temperature | If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. |
19* | Low Engine Oil Pressure | If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. |
20* | Engine (Vapor Motor CR) Failed to Start | If the unitshuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. |
21* | Cooling Cycle Check | Manually monitor load temperature. Report this alarm at the end of the day. |
22* 23 | Heating Cycle Check Cooling Cycle Fault | Manually monitor load temperature. Report this alarm at the end of the day. The unit (or zone) is no longer able to operate and hasbeen shut down. Repair immediately. |
24 | Heating Cycle Fault | The unit (or zone) is no longer able to operate and has been shut down. Repair immediately. |
25 | Alternator Check | If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. |
26* 27* | Check Refrigeration Capacity Vapor Motor RPM High (CR) | Manually monitorload temperature. Report this alarm at the end of the day. If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. |
28 | Pretrip or Self Check Abort | Report this alarm at the end of the day. |
29 | Defrost Damper Circuit Check | Manually monitor load temperature. Report this alarm at the end of the day. |
30 | Defrost DamperStuck Closed | The unit is no longer able to operate and has been shut down. Repair immediately. |
31 32 | Check Oil Pressure Switch Refrigeration Capacity Low | If the unit shuts down on this alarm code repair immediately. Otherwise, report this alarm at the end of the day. The unit (or zone) is no longer able to operate and has been shut down. Repair immediately. |
33 | Check Engine...