Comands

PRACTICA 2

2/MAR/2012
6-A
Command: UNITS
Command: LIMITS
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.00,0.00>: 0,0
Specify upper right corner<420.00,297.00>: 11,8.5
Command: REC
RECTANG
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: 0,0
Specify other corner point or [Area/Dimensions/Rotation]: 11,8.5
Command: Z
ZOOMSpecify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: A
RECTANG
Specify first corner point or[Chamfer/Elevation/Fillet/Thickness/Width]: 3,2
Specify other corner point or [Area/Dimensions/Rotation]: 7,5
Command: LINE
Specify first point: _mid of
Specify next point or [Undo]: _mid of
Command: C
CIRCLESpecify center point for circle or [3P/2P/Ttr (tan tan radius)]: _endp of
Specify radius of circle or [Diameter] <1.00>:
Command: C
CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tanradius)]: 2P
Specify first end point of circle's diameter: _qua of
Specify second end point of circle's diameter: _qua of
Command: OFFSET
Current settings: Erase source=No Layer=SourceOFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <Through>: .25
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo]<Exit>: M
Specify point on side to offset or [Exit/Undo] <next object>:
Specify point on side to offset or [Exit/Undo] <next object>:
Command: C
CIRCLE Specify center point for circle or[3P/2P/Ttr (tan tan radius)]: 2P
Specify first end point of circle's diameter: _qua of
Specify second end point of circle's diameter: _qua of
Command: C
CIRCLE Specify center point for circle or[3P/2P/Ttr (tan tan radius)]: 2P
Specify first end point of circle's diameter: _qua of
Specify second end point of circle's diameter: _qua of
Command: LINE
Specify first point: _qua of
Specify...