Como Hacer Cometa Dragon Chino
Páginas: 2 (267 palabras)
Publicado: 20 de enero de 2013
www.activitytv.tv
como hacer cometa de dragon chino
DRAGON KITE
level
MATERIALS
•
•
•
•
•
RSN, tyvek, plastic garbage bag
cloth tapebamboo stick - 48” long
magic markers
ruler (yardstick)
•
•
•
•
•
objects to make 2 circles i.e. pot lid
string
pencil
toothpickhobby stick
DIRECTIONS
1. Lay sail flat and draw a 16 inch diameter circle. Draw a 14 inch diameter circle circle on the inside.
2. Cut out outercircle. Cut slits in edge of circle, 2” on center all the way around.
3. Bend bamboo stick and form 14” circle. Tape overlapping ends.
4. Locatebridle point on head and apply 2 layers of tape 1” long on location for reinforcement.
5. Make 2 holes with a toothpick, 1/2” apart. Make larger with apencil point for bridle string.
6. Cut bridle string 16” long. Stick through holes from the front and tie. Make a fat knot on the other end.
7. Placebamboo frame on head sail. Fold over tabs and tape down. Make sure sail is very tight when finished.
8. Make tail 4 feet or longer x 1 foot wide.Place on back side of head, ensuring top of sail is fully on head. Tape in
position.
9. Make fly line. Cut 50 feet of string and attach to hobby stick.10. Make 4” loop on end of string, larks head knot to kite bundle.
11. Launch instructions: Let out more than 30 feet of fly line and have helperhold and launch. “Good winds!”
page 1
www.activitytv.tv
DRAGON KITE
level
DIRECTIONS (continued) *kite not drawn to scale
page 2
como hacer cometa de dragon chino
DRAGON KITE
level
MATERIALS
•
•
•
•
•
RSN, tyvek, plastic garbage bag
cloth tapebamboo stick - 48” long
magic markers
ruler (yardstick)
•
•
•
•
•
objects to make 2 circles i.e. pot lid
string
pencil
toothpickhobby stick
DIRECTIONS
1. Lay sail flat and draw a 16 inch diameter circle. Draw a 14 inch diameter circle circle on the inside.
2. Cut out outercircle. Cut slits in edge of circle, 2” on center all the way around.
3. Bend bamboo stick and form 14” circle. Tape overlapping ends.
4. Locatebridle point on head and apply 2 layers of tape 1” long on location for reinforcement.
5. Make 2 holes with a toothpick, 1/2” apart. Make larger with apencil point for bridle string.
6. Cut bridle string 16” long. Stick through holes from the front and tie. Make a fat knot on the other end.
7. Placebamboo frame on head sail. Fold over tabs and tape down. Make sure sail is very tight when finished.
8. Make tail 4 feet or longer x 1 foot wide.Place on back side of head, ensuring top of sail is fully on head. Tape in
position.
9. Make fly line. Cut 50 feet of string and attach to hobby stick.10. Make 4” loop on end of string, larks head knot to kite bundle.
11. Launch instructions: Let out more than 30 feet of fly line and have helperhold and launch. “Good winds!”
page 1
www.activitytv.tv
DRAGON KITE
level
DIRECTIONS (continued) *kite not drawn to scale
page 2
Leer documento completo
Regístrate para leer el documento completo.