Como Hacer Un Domo

 fieltro
First, you need to take all your felt and cut out the basic shapes. I made my Domo out of a single sheet of brown, but it can be scaled to any size. Cutting instructions are on thediagram.

 2

Next, you tack the two jagged teeth pieces to the red inner mouth piece.

 3

Now take the body piece with the hole and line up the inner mouth/teeth and sew them together.I used a running stitch for this.

 4

Now you're going to attach the eyes. Use white thread to tack the eyes down and give them accents at the same time, then use black thread to sew aroundthe edges of the eyes. Also sew the teeth down flat using a running stitch. Again, I used a running stitch for this step.

 5

Now you're going to prepare the arms. Fold them in half, line themup correctly, and then sew the open side shut, leaving the end open for stuffing (see animated illustration here for where to sew).

 6

Now stuff the arms! Make sure there's no stuffingsticking out the end. it's okay to have a bit of a flap of felt--it will make it easier to attach the arms later.

 7

Next, you're going to whip stitch the side pieces onto the front and back bodypieces, making a hollow Domo-shell. When you run to the end of the strip, just whip stitch the end of one strip to the next and press it flat, and then continue to stitch the sides to the body pieces.Be sure to leave an opening for stuffing.

 8

Now stuff your Domo! Make sure you make the body nice and firm, and make sure there aren't any awkward lumps in the stuffing anywhere, so your Domois the right shape.

 9

Lastly, you need to attach the arms. Whip stitch them to the sides of the body, making sure that they are both even--you don't want one higher than the other! Also,whip stitch the hole shut that you left for stuffing.

 10

...And you're done!

If you run into any problems, feel free to ask me any questions. It shouldn't be too hard though, just a lot...