Configuracion Xbee
XBee-PRO® XSC RF Module
RF Module Operation
RF Module Configuration
Appendices
Product Manual 90000938-B
For RF Module Part Number:
XBP09-XC…
900 MHz OEM RF Modules by Digi International Inc.
11001 Bren Road East
Minnetonka, MN 55343
www.digi.com
90000938_B
3, 17, 2010
XBee‐PRO®XSC RF Module ‐ Product Manual
© 2010 Digi International, Inc. Allrights reserved
No part of the contents of this manual may be transmitted or reproduced in any
form or by any means without the written permission of Digi International, Inc.
XBee‐PRO® is a registered trademark of Digi International Inc.
Technical Support:
Phone: (801) 765‐9885
Live Chat: www.digi.com
© 2010 Digi International, Inc.
ii
XBee‐PRO® XSC OEM RF Modules C ontents
1. XBee-PRO® XSC OEM RF Module.......... 4
Key Features......................................... 5
Worldwide Acceptance .......................... 5
Specifications ....................................... 6
Pin Signals............................................ 7
Electrical Characteristics ...................... 8
Timing Specifications ............................ 8
MechanicalDrawings ............................ 9
2. RF Module Operation ......................... 10
Serial Communications ....................... 10
UART-Interfaced Data Flow.................. 10
Serial Data .........................................10
Flow Control ...................................... 11
Modes of Operation ............................ 12
Idle Mode.......................................... 12
Transmit Mode ................................... 12
Receive Mode .................................... 14
Sleep Mode ........................................14
Command Mode ................................. 17
3. RF Module Configuration.................... 19
XBee Programming Examples ............. 19
AT Commands ................................... 19
Binary Commands.............................. 19
Command Reference Table ................. 20
Command Descriptions ...................... 21
Appendix A:Agency Certifications........... 38
FCC (United States) Certification ........ 38
Labeling Requirements ........................ 38
FCC Notices ....................................... 38
Limited Modular Approval .................... 38
FCC-approved Antennas...................... 39
IC (Industry Canada) Certification ..... 39
Appendix B: Additional Information ....... 43
1-Year Warranty ................................. 43
Ordering Information ......................... 43
Contact Digi ........................................ 45
© 2010 Digi Internaitonal, Inc.
1
XBee‐PRO® XSC OEM RF Modules 1. XBee‐PRO® XSC OEM RF Module
The XBee-PRO XSC (900 MHz) OEM RF Modules were
engineered to afford OEMs and integrators an easy-to-use RF
solution that provides reliable delivery of critical data between
remote devices. These modules come configured to sustain
reliable long-range wireless links.
The XBee Module is a drop-in wireless solution that transfers a
standard asynchronous serial data stream.© 2010 Digi International, Inc.
4
XBee‐PRO® XSC OEM RF Modules
1.1. Key Features
Long Range Data Integrity
Easy-to-Use
XBee-PRO XSC (900 MHz) Range:
• Indoor/Urban: up to 1200' (370m)
• Continuous RF data stream
up to 9600 bps
• Outdoor line-of-sight: up to 6 miles (9.6 km)
w/ 2.1 dBm dipole antenna
• No configuration required for out-of-the-box
RF datacommunications
• Outdoor line-of-sight: up to 15 miles (24
km) w/ high gain antenna
• Advanced configurations available through
standard AT & binary Commands
• Receiver Sensitivity: -106 dBm,
• Portable (small form factor easily designed
into a wide range of data radio systems)
• Advanced Networking & Security
• True peer-to-peer (no "master" required)
communications
•...
Regístrate para leer el documento completo.