Cool Down Fan

COOL DOWN FAN

DESCRIPTION

Do you want to chill out? Then this experiment will help you keep cool. Let show you how to make your own fan…batteries not included…and not necessary!

MATERIALS1 peanut butter jar lid
1 wooden kabob stick
hammer
knife
3 corks
1 nail
1 paper clasp
1 tack
1 plastic notebook divider
1 rubber band
1 small box
scissors

DIRECTIONS

1. You will beputting 3 holes in your box, 2 in the front and 1 in the back, so have an adult help you. For the 2 holes in the front, 1 should be 2 inches from the top, the other 2 inches from the bottom. Gentlytake your nail and push it through the cardboard to create your holes. The hole in the back should be exactly opposite from the hole in the top front.
2. Take your hammer, and nail two holes in eachof your peanut butter lids. Make one hole in the center of your lid and another hole near the right edge. (This is an adult's job).
3. Take your thumb tacks and attach one of your corks to your peanutbutter lid. You're going to push the tack through the hole that you just created on the right side of your lid. This will be the handle of your fan.
4. To attach your handle to your box, take thepaper clasp and push it through the center hole in the lid. Then, push the clasp through the bottom hole in the box.
5. Take your notebooks and cut them up to create fan blades. Cut out 4 strips ofplastic about an inch wide.
6. Use one of the corks to make the fan wheel for the blades to rotate on. Take your cork and ask your adult helper to cut four slits in it. The cuts should be the same sizeas your fan blades. Make sure that the cuts are evenly spaced around the cork, and insert your fan blades into your corks by pushing each plastic strip into a slit.
7. Next, take your kabob stick andpush them into the cork with the fan blades, using the pointy end. Take your fan and insert your kabob stick into the 2 holes at the top of your box. The kabob should go through the box and come...