Cortadora Minera

www.mkdiamond.com

MK-5005S BlocK Saw OWNER’S MANUAL PARTS LIST & OPERATING INSTRUCTIONS

Revision 101

12.2010

Manual Part# 158769 caution: Read all safety and operating instructions before using this equipment. This parts list MUST accompany the equipment at all times.

INTRoDUcTIoN
Congratulations on your purchase of a MK-5000S Block Saw. We are certain that you will be pleasedwith your purchase. MK Diamond takes pride in producing the finest construction power tools and diamond blades in the industry. Operated correctly, your MK-5000S Block Saw should provide you with years of service. In order to help you, we have included this manual. This Owner’s Manual contains information necessary to operate and maintain your MK-5000S Block Saw safely and correctly. Please take thetime to familiarize yourself with the MK-5000S Block Saw by reading and reviewing this manual. Read and follow all safety, operating and maintenance instructions. If you should have questions concerning your MK-5000S Block Saw, please feel free to call our friendly customer service department at: 800 421-5830 Regards, MK Diamond

NoTE THIS INFoRMaTIoN FoR FUTURE USE: MoDEl NUMBER: SERIalNUMBER: PURcHaSE PlacE: PURcHaSE DaTE:

NoTE: For your (1) one year warranty to be effective, complete the warranty card (including the serial number) and mail it in as soon as possible.

2

TaBlE oF coNTENTS

SaFETY Safety Messages Damage Prevention Message General Safety Precautions and Hazard Symbols California Proposition 65 Message Electrical Requirements and Grounding Instructions SafetyLabel Locations Product Specifications UNPacKING aND aSSEMBlY Unpacking Contents Transport Assembly SETUP, aDJUSTMENT aND oPERaTIoN Setup Adjustment and Operation Cleanup MaINTENaNcE aND TRoUBlESHooTING Maintenance Troubleshooting EXPloDED VIEw aND PaRTS lIST Exploded View Parts List THEoRY Theory of Diamond Blades accESSoRIES, oRDERING and RETURN INSTRUcTIoNS Accessories Ordering InformationReturn Material Policy Packaging Instructions Authorized Service Centers

Pages 4 4 4-6 6 8-9 10 11 12 12 12 13-14 15-17 18-24 25 26-27 28-36 38-47 48-52 53 54 55 55 55 55

3

MK-5005S

SaFETY

Read and follow all safety, operating and maintenance instructions. Failure to read and follow these instructions could result in injury or death to you or others. Failure to read and follow theseinstructions could also result in damage and/or reduced equipment life. SaFETY MESSaGES
A safety message alerts you to potential hazards that could hurt you or others. Each safety message is preceded by a safety alert symbol ( ) and one of three words: DaNGER, waRNING, or caUTIoN.

DaNGER

You wIll be KIllED or SERIoUSlY INJURED if you do not follow directions.

waRNING You caN be KIllED orSERIoUSlY INJURED if you do not follow directions. caUTIoN You caN be INJURED if you do not follow directions. It may also be used to alert against unsafe practices.

DaMaGE PREVENTIoN aND INFoRMaTIoN MESSaGES A Damage Prevention Message is to inform the user of important information and/or instructions that could lead to equipment or other property damage if not followed. Information Messagesconvey information that pertains to the equipment being used. Each message will be preceded by the word NOTE, as in the example below. NoTE: Equipment and/or property damage may result if these instructions are not followed. GENERal SaFETY PREcaUTIoNS aND HaZaRD SYMBolS In order to prevent injury, the following safety precautions and symbols should be followed at all times! SaFETY PREcaUTIoNS alwaYSread this Owner’s Manual before operating the machine.

alwaYS keep the Blade Guards in place. REMoVE aDJUSTING KEYS aND wRENcHES Form a habit of checking to see that keys and adjusting wrenches are removed from the power tool before it is turned on. KEEP woRK aREa clEaN Cluttered work areas and benches invite accidents. Do NoT USE IN DaNGERoUS PlacES Do NoT use power tools in damp or wet...