Cretesafe T-300

CreteSafe T-300 ®

HEAVY-DUTY TEXTURED WATERPROOF COATING FOR SURFACE PROTECTION
Liquid Rubber CreteSafe T-300® is a fluid applied polymer modified acrylic containing aggregate for improved tractionin high traffic areas.
Available in a range of colours, Liquid Rubber CreteSafe T-300® when cured fully adheres to the substrate to which it is applied, providing a
flexible long wearing surface.Liquid Rubber CreteSafe T-300® is not affected by sunlight, water or occasional chemical spills. CreteSafe T-300®
is a single component, cold applied coating, applied alone or as a topcoat over LiquidRubber CreteSafe B-150®, B-250® or A-Primer.
Liquid Rubber CreteSafe T-300® is recommended where a durable textured protective finish with good elasticity and water resistant properties
is needed orwhere surface protection from intermittent hydrocarbon or chemical spills is required. Liquid Rubber CreteSafe T-300® is a polymer
modified acrylic emulsion formulated for application by brush, rolleror squeegee. Applications include utility room floors and walkways, truck
bed liners, warehouse floors and roof top patios.
Liquid Rubber CreteSafe T-300® is water based and environmentally safe,providing an excellent textured coating that is flexible and resists
cracking, chipping and aging, with excellent freeze/thaw resistance.
• FREE OF FLAMMABLE SOLVENTS

• NON-TOXIC

PHYSICALPROPERTIES (Liquid)

• NO VOC’S

• LOW ODOUR & WATER BASED

APPLICATION

PROPERTY

TYPICAL RESULTS

Colour

See colour chart

Specific gravity (liquid) g/cm3

Approx. 1.2

Odour

NoneVolatile Organic Compound

Contains no solvents

Solids Content

58 - 60%

Viscosity, Brookfield (cps)

8,000 - 10,000

pH

8 - 11

Liquid Rubber CreteSafe T-300® is a single componentproduct
that may be applied using a roller, squeegee or aggregate spray
equipment. Liquid Rubber CreteSafe T-300® is applied in thickness
from 1.0 – 2.0mm.
Liquid Rubber CreteSafe T-300® should...