Cubex 6200
Páginas: 5 (1084 palabras)
Publicado: 29 de enero de 2013
6200
Description: The 6200 is a track mounted In-The-Hole drill designed to drill with ITH hammers powered by high air pressure. High pressures are obtained with an optional towable booster. Performance: The 6200 can be used to drill from 3.5” (89 mm) to 8.5” (216 mm) diameter holes. Most applications allow the machine to drill to a depth greater than 330’ (100m). Optional Accra Feed and ERISpanel The inclusion of Accra Feed on Cubex underground drills has increased overall drill performance by providing optimal pressure to the bit in all rock conditions. Lost drill string situations are reduced and overall hole integrity is improved. All the hydraulic control functions are electric/ hydraulic controlled through the CAN-BUS controller/ computer and programmable modules – this providesmore robust mechanical connections in the wiring harnesses. The Cubex ERIS system is set up so that mine managers and engineers are able access the benefits of an expandable control platform. This unit has proven to be very reliable, while providing a high degree of productivity.
Main Specifications
Carrier Top Drive Mast Positioning System Control System Powerpack Hammer Lubrication WaterInjection System Ground Clearance Tramming Length Tramming Width Tramming Height Weight Tramming Speed, Electric Horizontal Only Gradeability 6200 Standard 6230 Standard Mast, Fized Centralizer Single Slideover Electric/Hydraulic Controls 37 kW AS-5200 27 lpm (48 bar) 180 mm 5 009 mm 1 803 mm 2 510 mm 8 165 kg 2 kph 35% 7 gal/min (700 psi) 7.1” 197.2” 71” 98.8” 18 000 lbs 1.2 mph 50 HP
Top DriveTop Drive Max Working Pressure Max Torque Rotation Speed Patented Splined Piston Breakout System 6230 207 bar 5 730 Nm 0-80 rpm 3 000 psi 4 225 lb.ft.
403-2 R13 1210
Standard Specifications
Carrier
Tracks - Sealed and lubricated with Caterpillar© take up system Type Width Brakes Ground Clearance Centralized Grease Lubrication Triple Grouser, Sealed and Lubricated 305 mm SAHR 180 mm 7.1”12”
Hammer Lubrication System
Grease/Oil Injection Metering Capacity Tank Size 4 L/hr 20 L 1 US Gal/hr 5.3 US Gal
Water Injection System
Water Pump Type Capacity Inlet Pressure Triplex Piston Pump 27 Lpm (48 bar) 2 - 7 bar (drilling) 7 Gal/min (700 psi) 30 - 100 psi (drilling)
Mast
Mast Feed Force Max Opening Standard Mast, Fixed Centralizer 70 kN 222 mm 15 800 lbs 8.75“
ElectricalSystem
Total Input Power Standard Voltage Frequency Lights Working Driving Lights Starter Safety Shutdowns 37 kW 600 VAC 60 Hz 2 x 55W HID 2 x 65W Delta-Wye Low Mine Water Pressure Low Hydraulic Oil Level Tram Active Strobe
Positioning System
Single Slideover Feed Extension (1.8 m [6’] Rod) Swing Angle Stinger Extension Top Bottom 724 mm 1 371 mm 360° 1 830 mm 610 mm 6’ 2’ 28.5” 54”
SafetyFeature
Control System
Control System Electric/Hydraulic Controls, Buggy Mounted Smooth Collaring 7.6 m (15’) Cable
Powerpack
Electric Motor Pump Type 1 x 37 kW 1 x 100 cc Variable Displacement Axial Piston Pump 1 x 5 micron 1 x 10 micron 265 L Electric Fill Pump Shell and Tube Cooler 70 US Gal 1 x 50 HP 6.1 cu.in./rec
Filtration Pressure Return Oil Tank Volume Tank Filling Oil CoolingCubex Ltd reserves the right to change this specification without further notice.
Cubex Ltd. Winnipeg, Manitoba, Canada
www.cubex.net
Selection of Optional Equipment
Optional Masts
Masts Standard Mast (Fixed or Split Centralizer) Heavy Mast (Fixed or Split Centralizer) Feed Force 70 kN 133 kN 15 800 lbs 30 000 lbs Max Opening 222 mm 222 mm 8.75” 8.75” Drill Pipe Lengths 4’/5’/6’4’/5’/6’
Pipe Handling Options
Pipe Arm, Single Axis Pipe Arm, Dual Axis To Assist Manual Pipe Handling
Fire Supression
Automatic Manual ANSUL System (6 Nozzles)
Positioning Systems Options
Positioning System - Double Slideover Pareallel Coverage 50/50 Stingers Top Bottom Increased Forward Dump Slideover Fold Up 1 448 mm 1 219 mm 1 219 mm 57” 4’ 4’
Control System
Control System...
Description: The 6200 is a track mounted In-The-Hole drill designed to drill with ITH hammers powered by high air pressure. High pressures are obtained with an optional towable booster. Performance: The 6200 can be used to drill from 3.5” (89 mm) to 8.5” (216 mm) diameter holes. Most applications allow the machine to drill to a depth greater than 330’ (100m). Optional Accra Feed and ERISpanel The inclusion of Accra Feed on Cubex underground drills has increased overall drill performance by providing optimal pressure to the bit in all rock conditions. Lost drill string situations are reduced and overall hole integrity is improved. All the hydraulic control functions are electric/ hydraulic controlled through the CAN-BUS controller/ computer and programmable modules – this providesmore robust mechanical connections in the wiring harnesses. The Cubex ERIS system is set up so that mine managers and engineers are able access the benefits of an expandable control platform. This unit has proven to be very reliable, while providing a high degree of productivity.
Main Specifications
Carrier Top Drive Mast Positioning System Control System Powerpack Hammer Lubrication WaterInjection System Ground Clearance Tramming Length Tramming Width Tramming Height Weight Tramming Speed, Electric Horizontal Only Gradeability 6200 Standard 6230 Standard Mast, Fized Centralizer Single Slideover Electric/Hydraulic Controls 37 kW AS-5200 27 lpm (48 bar) 180 mm 5 009 mm 1 803 mm 2 510 mm 8 165 kg 2 kph 35% 7 gal/min (700 psi) 7.1” 197.2” 71” 98.8” 18 000 lbs 1.2 mph 50 HP
Top DriveTop Drive Max Working Pressure Max Torque Rotation Speed Patented Splined Piston Breakout System 6230 207 bar 5 730 Nm 0-80 rpm 3 000 psi 4 225 lb.ft.
403-2 R13 1210
Standard Specifications
Carrier
Tracks - Sealed and lubricated with Caterpillar© take up system Type Width Brakes Ground Clearance Centralized Grease Lubrication Triple Grouser, Sealed and Lubricated 305 mm SAHR 180 mm 7.1”12”
Hammer Lubrication System
Grease/Oil Injection Metering Capacity Tank Size 4 L/hr 20 L 1 US Gal/hr 5.3 US Gal
Water Injection System
Water Pump Type Capacity Inlet Pressure Triplex Piston Pump 27 Lpm (48 bar) 2 - 7 bar (drilling) 7 Gal/min (700 psi) 30 - 100 psi (drilling)
Mast
Mast Feed Force Max Opening Standard Mast, Fixed Centralizer 70 kN 222 mm 15 800 lbs 8.75“
ElectricalSystem
Total Input Power Standard Voltage Frequency Lights Working Driving Lights Starter Safety Shutdowns 37 kW 600 VAC 60 Hz 2 x 55W HID 2 x 65W Delta-Wye Low Mine Water Pressure Low Hydraulic Oil Level Tram Active Strobe
Positioning System
Single Slideover Feed Extension (1.8 m [6’] Rod) Swing Angle Stinger Extension Top Bottom 724 mm 1 371 mm 360° 1 830 mm 610 mm 6’ 2’ 28.5” 54”
SafetyFeature
Control System
Control System Electric/Hydraulic Controls, Buggy Mounted Smooth Collaring 7.6 m (15’) Cable
Powerpack
Electric Motor Pump Type 1 x 37 kW 1 x 100 cc Variable Displacement Axial Piston Pump 1 x 5 micron 1 x 10 micron 265 L Electric Fill Pump Shell and Tube Cooler 70 US Gal 1 x 50 HP 6.1 cu.in./rec
Filtration Pressure Return Oil Tank Volume Tank Filling Oil CoolingCubex Ltd reserves the right to change this specification without further notice.
Cubex Ltd. Winnipeg, Manitoba, Canada
www.cubex.net
Selection of Optional Equipment
Optional Masts
Masts Standard Mast (Fixed or Split Centralizer) Heavy Mast (Fixed or Split Centralizer) Feed Force 70 kN 133 kN 15 800 lbs 30 000 lbs Max Opening 222 mm 222 mm 8.75” 8.75” Drill Pipe Lengths 4’/5’/6’4’/5’/6’
Pipe Handling Options
Pipe Arm, Single Axis Pipe Arm, Dual Axis To Assist Manual Pipe Handling
Fire Supression
Automatic Manual ANSUL System (6 Nozzles)
Positioning Systems Options
Positioning System - Double Slideover Pareallel Coverage 50/50 Stingers Top Bottom Increased Forward Dump Slideover Fold Up 1 448 mm 1 219 mm 1 219 mm 57” 4’ 4’
Control System
Control System...
Leer documento completo
Regístrate para leer el documento completo.