Curso Sistemas De Bombeado

TM

GENERAL INSTALLATION, OPERATION, MAINTENANCE AND TROUBLESHOOTING MANUAL FOR THREE SCREW AND CIG SERIES PUMPS

WARNING
This manual, and the specific INSTRUCTION MANUAL, should be read thoroughly prior to pump installation, operation, maintenance or troubleshooting.

This manual now is identified as part no. SRM00046

Manual No. CA-1

Rev. 4

September 1997

READ THIS ENTIREPAGE BEFORE PROCEEDING
FOR THE SAFETY OF PERSONNEL AND TO PREVENT DAMAGE TO THE EQUIPMENT, THE FOLLOWING NOMENCLATURE HAS BEEN USED IN THIS MANUAL:

DANGER Failure to observe the precautions noted in this box can result in severe bodily injury or loss of life. WARNING Failure to observe the precautions noted in this box can cause injury to personnel by accidental contact with the equipment orliquids. Protection should be provided by the user to prevent accidental contact. CAUTION ATTENTION

Failure to observe the precautions noted in this box can cause damage or failure of the equipment.
Non-compliance of safety instructions identified by the following symbol could affect safety for persons: Safety instructions where electrical safety is involved are identified by: Safety instructionswhich shall be considered for reasons of safe operation of the pump and/or protection of the pump itself are marked by the sign: ATTENTION

CONTENTS
SAFETY AND TABLE OF CONTENTS .................................................................................. A A - GENERAL .........................................................................................................................1 B - TRANSPORTATION AND STORAGE ............................................................................... 1 C - DESCRIPTION OF THE PUMP ........................................................................................ 1 D - INSTALLATION/ASSEMBLY .............................................................................................. 1 E - STARTUP OPERATION AND SHUTDOWN................................................................... 10 , F - MAINTENANCE .............................................................................................................. 14 G - FIELD AND FACTORY SERVICE ................................................................................... 15 H - TROUBLESHOOTING.................................................................................................... 16

A

APPLICATIONS MANUAL FOR IMO PUMPS
A. GENERAL
The instructions found herein cover the general installation, operation, maintenance and troubleshooting of subject equipment. NOTE: Individual contracts may have specific provisions that vary from this manual. Should any questions arise which may not be answered by these instructions, refer to the specificpump instruction manual provided with your order. For further detailed information and technical assistance to questions not answered by these manuals, please refer to Imo Pump, Technical/Customer Service Department, at (704) 289-6511. This manual cannot possibly cover every situation connected with the installation, operation, maintenance and troubleshooting of the equipment supplied. Everyeffort was made to prepare the text of the manual so that engineering and design data was transformed into easily understood wording. Imo Pump must assume the personnel assigned to operate and maintain the supplied equipment and apply this instruction manual have sufficient technical knowledge and experience to use sound safety and operational practices which may not be otherwise covered by thismanual. In applications where equipment furnished by Imo Pump is to become part of a process or other machinery, these instructions should be thoroughly reviewed to determine proper fit of the equipment into overall plant operational procedures.

WARNING
If installation, operation, and maintenance instructions are not correctly and strictly followed and observed, injury to personnel or serious...