Curvas De Rendimiento En Soplantes

DATA SHEET

TUBULAR MODULES
MODULE TYPE:
MODULE MATERIAL:
MEMBRANE INNER DIAMETER:
MEMBRANE EXCHANGE:

P55C_I10F
PVC-C
10.3 mm
Is not possible

MAIN APPLICATIONS
⊗ Membrane bioreactor⊗ Waste water treatment

⊗ Oil/water separation

⊗ Purification

⊗ Prefiltration

⊗ Concentration

⊗ Separation of biomass

⊗ Separation of enzymes

BASIC CHARACTERISTICS
Berghoftubular compact modules of Type BTU P..C I10F are especially designed to get much more membrane
area into a standard module casing. Thus a compact Membrane plant is available, where less pumps, lessfittings
and less tubes are necessary. The module casing is quite robust so that a long lifetime of the module casing may
be expected. To prolong the lifetime of the module it is possible to set defectmembranes out of service easily.
These properties guarantee low running costs.
We attached particular importance to the possibility of cleaning the modules properly.

MODULE DATA - DIMENSIONSParameter [unit] \ Module Type

P55C_I10F

Membrane Area [m²]

5.3

Module Lenght [mm]

3010

Outer Diameter of Module [mm]

110

Inner Diameter of Mebrane [mm]

10.3

Module MaterialConnection of Concentrate
Connection of Permeate
Number of Permeate Connections

PVC-C, Resin
Flange/Flange Adapter d110
R 1.5“ External Thread
1

Positioning

Distance between middle ofthe Permeate Outlet and
Moduel End [mm]

120

Since the conditions under which our products may be used are beyond our control, this information does not imply any guarantee of final productperformance and we cannot
accept any liability with respect of our products. All informations are based on our general experiences and are intended to provide a guideline for the selection and use ofproducts. The quality of our products is guaranteed under our conditions of sale. We reserve the right to make modifications as a result of new developments.

BTU P 55C_I10FDBengl
Stand: 0j40m1...