Datasheet

Philips Semiconductors

Product specification

Low power quad op amps

LM124/224/324/324A/ SA534/LM2902

DESCRIPTION
The LM124/SA534/LM2902 series consists of four independent, high-gain, internally frequency-compensated operational amplifiers designed specifically to operate from a single power supply over a wide range of voltages.

PIN CONFIGURATION
D, F, N Packages
OUTPUT 1 –INPUT 1 1 2 3 4 56 7 –+ 2 +– 3 1 –+ 4 +– 14 13 12 11 10 9 8 OUTPUT 4 –INPUT 4 +INPUT 4 GND +INPUT 3 –INPUT 3 OUTPUT 3

UNIQUE FEATURES
In the linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage. The unity gain crossover frequency and the input bias current are temperature-compensated.

+INPUT1 V+ +INPUT 2 –INPUT 2 OUTPUT 2

FEATURES

• Internally frequency-compensated for unity gain • Large DC voltage gain: 100dB • Wide bandwidth (unity gain): 1MHz (temperature-compensated) • Wide power supply range Single supply: 3VDC to 30VDC or dual • Very low supply current drain: essentially independent of supply • Low input biasing current: 45nADC (temperature-compensated) • Low input offsetvoltage: 2mVDC and offset current: 5nADC • Differential input voltage range equal to the power supply voltage • Large output voltage: 0VDC to VCC-1.5VDC swing
ORDERING INFORMATION
DESCRIPTION 14-Pin Plastic Dual In-Line Package (DIP) 14-Pin Ceramic Dual In-Line Package (CERDIP) 14-Pin Plastic Dual In-Line Package (DIP) 14-Pin Ceramic Dual In-Line Package (CERDIP) 14-Pin Plastic Small Outline (SO)Package 14-Pin Plastic Dual In-Line Package (DIP) 14-Pin Ceramic Dual In-Line Package (CERDIP) 14-Pin Plastic Small Outline (SO) Package 14-Pin Plastic Dual In-Line Package (DIP) 14-Pin Plastic Small Outline (SO) Package 14-Pin Plastic Dual In-Line Package (DIP) 14-Pin Ceramic Dual In-Line Package (CERDIP) 14-Pin Plastic Small Outline (SO) Package 14-Pin Plastic Small Outline (SO) Package 14-PinPlastic Dual In-Line Package (DIP) voltage (1mW/op amp at +5VDC) supplies: ±1.5VDC to ±15VDC

TOP VIEW

SL00065

Figure 1. Pin Configuration

TEMPERATURE RANGE -55°C to +125°C -55°C to +125°C -25°C to +85°C -25°C to +85°C -25°C to +85°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +125°C -40°C to +125°C

ORDER CODE LM124N LM124FLM224N LM224F LM224D LM324N LM324F LM324D LM324AN LM324AD SA534N SA534F SA534D LM2902D LM2902N

DWG # SOT27-1 0581B SOT27-1 0581B SOT108-1 SOT27-1 0581B SOT108-1 SOT27-1 SOT108-1 SOT27-1 0581B SOT108-1 SOT108-1 SOT27-1

1995 Nov 27

1

853-0929 16050

Philips Semiconductors

Product specification

Low power quad op amps

LM124/224/324/324A/ SA534/LM2902

ABSOLUTE MAXIMUM RATINGS
SYMBOL VCC VINVIN PD Supply voltage Differential input voltage Input voltage Maximum power dissipation, TA=25°C (still-air)1 N package F package D package Output short-circuit to GND one amplifier2 VCC<15VDC and TA=25°C IIN TA Input current (VIN<-0.3V)3 Operating ambient temperature range LM324/A LM224 SA534 LM2902 LM124 TSTG TSOLD Storage temperature range Lead soldering temperature (10sec max) 0 to +70 -25 to+85 -40 to +85 -40 to +125 -55 to +125 -65 to +150 300 °C °C °C °C °C °C °C 1420 1190 1040 Continuous 50 mA mW mW mW PARAMETER RATING 32 or ±16 32 -0.3 to +32 UNIT VDC VDC VDC

NOTES: 1. Derate above 25°C at the following rates: F package at 9.5mW/°C N package at 11.4mW/°C D package at 8.3mW/°C 2. Short-circuits from the output to VCC+ can cause excessive heating and eventual destruction. Themaximum output current is approximately 40mA, independent of the magnitude of VCC. At values of supply voltage in excess of +15VDC continuous short-circuits can exceed the power dissipation ratings and cause eventual destruction. 3. This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the input PNP transistors...