Datos sobre micrologix

MICROLOGIX PROGRAMMABLE CONTROLLERS
SELECTION GUIDE

BULLETIN 1761 MicroLogix 1000 BULLETIN 1763 MicroLogix 1100 BULLETIN 1762 MicroLogix 1200 BULLETIN 1766 MicroLogix 1400 BULLETIN 1764 MicroLogix 1500

MicroLogix Programmable Controllers Overview

3

MicroLogix Programmable Controllers Overview

The MicroLogix family of controllers provides five levels of control. Small on size,big on performance, the MicroLogix 1000 controller offers control capabilities in an affordable, compact package. The MicroLogix 1200 controller is small enough to fit in tight spaces, but powerful enough to accommodate a broad range of applications. Designed to grow as your needs grow, the MicroLogix 1500 controller helps you achieve high-level control in a variety of applications. The MicroLogixfamily’s newest members, the MicroLogix 1100 and 1400 controllers, further enhance the MicroLogix family by expanding the application coverage area while offering great new features at an affordable price.

MicroLogix 1000 Controller

Based on the architecture of the market-leading SLC 500 controller family, the MicroLogix 1000 controller brings high-speed, powerful instructions and flexiblecommunication to applications that demand compact, cost-effective solutions. The MicroLogix 1000 controller is available in 10-point, 16-point, or 32-point digital I/O versions. Analog versions are also available with 20 digital I/O points, with 4 analog inputs (2 voltage and 2 current) and 1 analog output (configurable for either voltage or current). The analog I/O circuitry for the MicroLogix 1000controller is embedded into the base controller, not accomplished through add-on modules: so, it provides very high-speed, cost-effective analog performance. The MicroLogix 1000 controller uses Rockwell Software RSLogix 500 and RSMicro programming software and shares a common instruction set with the MicroLogix and SLC 500 families of controllers.

Publication 1761-SG001D-EN-P - May 2009

4MicroLogix Programmable Controllers Overview

Advantages for the MicroLogix 1000 Controllers
• Preconfigured 1 KB program and data memory to ease configuration (for example, preconfigured bit, integer, timers, and counters). • Fast processing allows for typical throughput time of 1.5 ms for a 500-instruction program. • Built-in EEPROM memory retains all of your ladder logic and data if thecontroller loses power, eliminating the need for battery back-up or separate memory module. • Multiple input commons lets you use the controller for either sinking or sourcing input devices and multiple output commons provide isolation in multi-voltage output applications. • RS-232 communication channel allows for simple connectivity to a personal computer for program upload, download, andmonitoring by using multiple protocols, including DF1 full-duplex. • RTU slave protocol supports using DF1 half-duplex allows up to 254 slave nodes to communicate with a single master by using radio modems, leased-line modems, or satellite uplinks. • Peer-to-peer messaging capability that lets you network up to 32 controllers on a DH-485 network by (using a 1761-NET-AIC module). • Advanced communicationnetworks, including DeviceNet and EtherNet/IP, through the 1761-NET-DNI and 1761-NET-ENI communication modules. • Controllers that have 24V DC inputs include a built-in, high-speed counter (6.6 kHz). • Adjustable DC input filters let you customize the input response time and noise rejection to meet your application needs. • Regulatory agency certifications for world-wide market (CE, C-Tick, UL, andc-UL, including Class I Division 2 Hazardous Location).

Publication 1761-SG001D-EN-P - May 2009

MicroLogix Programmable Controllers Overview

5

MicroLogix 1100 Controller
The MicroLogix 1100 controller is designed to broaden application coverage through embedded analog inputs, Ethernet communication, and visualization capabilities. MicroLogix 1100 controllers maintain the same...