Datos Tecnicos Rslogix Emulate

RSLogix Emulate
Technical Data

™

RSLogix Emulate 5™ and RSLogix Emulate 500™ are Microsoft®

Windows®-based software packages that emulate one or more PLC-5® or SLC 500™ processor stations.You determine which PLC5/SLC 500 ladder programs you want to run, and RSLogix Emulate scans the ladder logic like an actual processor. RSLogix Emulate is used for testing and debugging ladder logicprograms prior to commissioning and startup. block of rungs, you are able to isolate that section of your program for testing purposes. Naturally, all of the available scan modes are selectable while ablock is defined. • With New Platform PLC-5s and SLC 500s, you can connect a serial hardware device to the processor at channel zero. RSLogix Emulate can emulate this functionality by using yourcomputer’s serial port. After connecting the hardware device to the selected serial port, RSLogix Emulate actually routes the data from the ASCII instructions to/from the serial port and your hardwaredevice. This allows you to check how your programs interface with serial devices (bar code readers, scales, terminals, etc.). • RSLogix Emulate can also be used to test your RSView32 screens. Simply tiethe I/O on your screens to RSLogix Emulate and find problems before you start up on the plant floor. RSLogix Emulate 5: • RSLogix Emulate 5 emulates all the programmable logic controllers in theAllenBradley PLC-5 family, except the PLC-5/250™. RSLogix Emulate 500: • RSLogix Emulate 500 emulates all the programmable logic controllers in the AllenBradley SLC 500 family, including the MicroLogix1000, 1200, and 1500 controllers.

Key Features
RSLogix Emulate 5 & 500: • Since RSLogix Emulate is not connected to I/O modules, I/O emulation is handled via debug files. Debug files are specialladder logic files that you create to simulate your inputs. Then, files are automatically filtered out when downloading to your actual processor. You can use Rockwell Software RSLogix 5™/RSLogix 500™ or...