Deploy Lync Edge Server

Basic Deployment: Edge Lync Server 2010

BASIC DEPLOYMENT: EDGE LYNC SERVER 2010
AUTHOR BY: HJ MD ALIYANI SABREY BIN YAKUB

Date: 22nd March 2012

By HJ MD ALIYANI SABREY BIN YAKUB

Basic Deployment: Edge Lync Server 2010

DEPLOYING EDGE LYNC SERVER 2010 (STANDARD EDITION)

Basic Network Lync Topology with Edge Lync Server 2010

Internet
Edge.netoverme.info 10.78.1.103Lync.netoverme.info 10.78.1.104 Lync.netoverme.info 10.78.1.102

External IP address for SIP Access 192.168.1.101 (access.netoverme.info) External IP address for Web Conferencing 192.168.1.102 (webcon.netoverme.info) External IP Address for Audio/Video 192.168.1.103 (av.netoverme.info)

Explanation of Deploying Edge Lync Server 2010 standard edition. In my basic deployment, the configuration is simple.As you can see, the director server is exist in the setup. In Edge Server, there are multiple network interface cards: In Edge Server: Internal IP Address and FQDN : 10.78.1.103 (edge.netoverme.info) External IP Address and FQDN: 192.168.1.101 (access.netoverme.info) 192.168.1.102 (webcon.netoverme.info) 192.168.1.103 (av.netoverme.info) *For external FQDN, I used public DNS that I subscribe andcreate the host record and SRV record.

Furthermore, in Edge server, it is a standalone workgroup server (which is not joining to the domain). I only add the primary DNS Suffix in the Computer Name Properties.

By HJ MD ALIYANI SABREY BIN YAKUB

Basic Deployment: Edge Lync Server 2010

Configure Edge Server in Front-End Lync Server 2010. After I setup for the Edge Server, I begin toconfigure it on the Front-End Pool side which is in lync.netoverme.info (10.78.1.103).

1. Open Lync Server 2010 Topology Builder. Expand Edge Server. Right-click New Edge Pool.

2. On Define New Edge Pool, click Next

By HJ MD ALIYANI SABREY BIN YAKUB

Basic Deployment: Edge Lync Server 2010 3. On Define New Edge Pool FQDN, type the FQDN of Edge pool, example here edge.netoverme.info andselect Single Computer Pool and click Next.

4. On Select Features, tick Enable Federation. Click Next

By HJ MD ALIYANI SABREY BIN YAKUB

Basic Deployment: Edge Lync Server 2010 5. On External FQDN, type the following FQDN. Click Next

6. On Define Internal IP address, type the internal IP Address. In my case I use 10.78.1.103. click Next

By HJ MD ALIYANI SABREY BIN YAKUB

BasicDeployment: Edge Lync Server 2010

7. On Define External IP Address, type the following below: SIP Access 192.168.1.101 Web Conferencing – 192.168.1.102 A/V Conferencing 192.168.1.103

8. On Define The Next Hop, just click next.

By HJ MD ALIYANI SABREY BIN YAKUB

Basic Deployment: Edge Lync Server 2010

9. Associate Front-End Pools, click Finish.

Publish the Topology 1. Once again, I needto publish the topology, right-click on the Netoverme Hubsite. Choose Publish Topology 2. On Publish the topology wizard, click Next. 3. Click Finish to complete the wizard. It will tell the step which is success or failure.

By HJ MD ALIYANI SABREY BIN YAKUB

Basic Deployment: Edge Lync Server 2010

Export the Configuration file 1. Open Lync Server 2010 Management Shell. Type the commandbelow to export the configuration file. This file will have to exported as zip file. Command: Export-CSConfiguration –Filename C:\filename.zip In my example:

2. Copy this to your Edge File using USB Pendrive or Mapping to your Network. I used file sharing. For example,open \\10.78.1.103\c$ and copy to c:\edge.zip

By HJ MD ALIYANI SABREY BIN YAKUB

Basic Deployment: Edge Lync Server 2010INSTALL LYNC EDGE SERVER

After I adding the edge server pool in front-end lync server, now I proceed to install the edge server. I need to install Microsoft .Net Framework 3.5 SP 1 in the edge.netoverme.info and must be a standalone server. However, I need to put Primary DNS Suffix in System properties.

Reboot the server after the changes.

For the ease of the internal server to find the...