Design Calculations

QINGDAO BCTA DESALINATION Plant
Façade Work


Design Calculations

设计：
Designed by:
校对：
Proofreader:
审核：
Reviewed by:
批准：
Approved by:
二〇一二年五月七日
7th May, 2012

Contents

1 计算引用的规范、标准及资料 Referenced Codes,Standard and Docuements during Calculations 1
1.1 幕墙设计规范：Codes for Curtain Wall Design 1
1.2 建筑设计规范：Codes for Architectural Design 1
1.3 铝材规范：Codes for Aluminum 2
1.4 金属板及石材规范：Codes for Metal Cladding and Stone 2
1.5 钢材规范：Codes for Steel 2
1.6 五金件规范：Codes for Hardware 4
1.7 《建筑结构静力计算手册》(第二版) Static Calculation Handbook for Building Structure (Second Edition) 5
1.8土建图纸：Civil Work Drawing: 5
2 基本参数 Basic Parameters 5
2.1 工程所在地区 Project Location 5
2.2 地面粗糙度分类等级 Classification Level of Ground Roughness 5
2.3 抗震设防Earthquake Resistance Protection 5
3 承受荷载计算 Calculation of Load 7
3.1 风荷载标准值的计算方法 Calculation Method of Standard Value of Wind Load 7
3.2 计算支撑结构时的风荷载标准值Standard value of wind load when calculating supporting structure 9
3.3计算面板材料时的风荷载标准值Standard value of wind load when calculating surface panel 10
3.4 垂直于幕墙平面的分布水平地震作用标准值Standard value of the horizontal seismic effect perpendicular to curtain wall plane 10
3.5 作用效应组合 Combination of action effects 10
4 立柱计算 Calculation of Upright 11
4.1 立柱型材选材计算 Calculation for selection of upright extrusions 12
4.2 确定材料的截面参数 Determine sectional parameters of materials 14
4.3选用立柱型材的截面特性 Sectional parameters of selected material for upright 16
4.4 立柱的抗弯强度计算 Calculation of bending strength of upright 16
4.5 立柱的挠度计算 Calculation of upright deflection 18
4.6 立柱的抗剪计算Calculation of shearing strength of upright 18
5 横梁计算 Calculation of transom 19
5.1 横梁型材选材计算 Calculation for selection of transom extrusions 20
5.2 确定材料的截面参数Determine sectional parameters of materials 22
5.3选用横梁型材的截面特性Sectional parameters of selected extrusions for transom 24
5.4 横梁的抗弯强度计算Calculation of bending strength of transom 25
5.5 横梁的挠度计算Calculation of transom deflection 26
5.6 横梁的抗剪计算Calculation of shearing strength of transom 26
6 面板计算Calculation of surface panel 28
6.1 风荷载设计值的计算 Calculation of design value of wind load 28
6.2 百叶的强度计算 Strength calculation of louver 29
6.3 面板的挠度计算 Calculation ofdeflection of surface panel 29
7 连接件计算 Connection calculation 30
7.1 横梁与角码间连接Connection of transom and angle piece 31
7.2 角码与立柱连接Connection of angle piece and upright 32
7.3 立柱与主结构连接Connection of upright and main structure 34
8 埋件计算(后锚固结构) Calculation of embedment (Post anchoring structure ) 37
8.1 荷载标准值计算 Calculation of standard value of load 37
8.2 锚栓群中承受拉力最大锚栓的拉力计算Calculation of the tendsion of the anchor bolt which bears the maximum tension in the anchor groups 38
8.3 群锚受剪内力计算 Calculation of anchor groups under shearing force 40
8.4 锚栓或植筋钢材破坏时的受拉承载力计算 Calculation of tensile strength as anchor bolts or reinforcements are being damaged 41
8.5 混凝土锥体受拉破坏承载力计算Calculation of tensile strength of concrete cone 42
8.6 锚栓或植筋钢材受剪破坏承载力计算Calculation of shearingstrength of anchor bolts or reinforcements 45
8.7 混凝土楔形体受剪破坏承载力计算Calcuation of shear strength of concrete wedge 46
8.8 混凝土剪撬破坏承载能力计算Calculation of bearing capacity under the concrete pryout failure 48
8.9 拉剪复合受力承载力计算 Calculation of bearing capacity under combined tensile and shearing force 49
9 转接件强度计算 Strength calculation of the brackets 49
9.1 受力分析 Force Analysis 49
9.2转接件的强度计算 Strength calculation of the brackets 50
10 钢立柱焊缝计算 Weld calculation of steel upright 50
10.1 受力分析 Force analysis 50
10.2 焊缝特性参数计算 Calculation of characteristic parameter of the weld 51
10.3 焊缝校核计算 Check Calculation of weld 52

Design Calculations

1 Referenced Codes, Standard and Docuements during Calculations...