Diodo 1N4007

1N4001 THRU 1N4007
PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES
l Low forward voltage drop
l High current capability
l High reliability
l High surgecurrent capability
l Exceeds environmental standards of MIL-S-19500/228

DO-41

MECHANICAL DATA
Case: Molded plastic , DO-41
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable perMIL-STD-202,
method 208 guaranteed
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢Jambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1N4001 1N4002 1N4003 1N4004 1N4005 1N40061N4007 UNITS
Maximum Recurrent Peak Reverse Voltage
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
35
75
140
280
420
560
700
V
Maximum DC Blocking Voltage
50
100
200
400
600800
1000
V
Maximum Average Forward Rectified
1.0
A
Current .375"(9.5mm) Lead Length at
TA=75 ¢J
Peak Forward Surge Current 8.3ms single
30
A
half sine-wave superimposed on rated load
(JEDECmethod)
Maximum Forward Voltage at 1.0A DC and
1.1
V
25 ¢J
Maximum Full Load Reverse Current Full
30
£g A
Cycle Average at 75 ¢J Ambient
5.0
£g A
Maximum Reverse Current at TA=25 ¢J
500£g A
At Rated DC Blocking Voltage TA=100 ¢J
Typical Junction capacitance (Note 1)
15
PF
Typical Thermal Resistance (Note 2) R £K JA
50
¢J /W
25
¢J /W
Typical Thermal resistance (NOTE 2) R £KJL
Operating and Storage Temperature Range
-55 to +150
¢J
TJ,TSTG
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Thermal Resistance Junction to Ambient and from junctionto lead at 0.375"(9.5mm) lead length P.C.B
mounted.

RATING AND CHARACTERISTIC CURVES

AVERAGE FORWARD RECTIFIED

1N4001 THRU 1N4007
1.6
MAXIMUM AVERAGE CURRENT RATING SINGLE

CURRENT...