Don Quijor¡Te De La Mancha

Quick Installation Guide

TEW-637AP
3.01

Table of Contents
English
1. Before You Start
2. Hardware Installation

1
1
2

Troubleshooting

7

Version 04.19.2011

1. Before You Start

Package Contents
TEW-637AP
Ÿ
Ÿ
Multi-Language Quick Installation Guide
Ÿ
CD-ROM (Utility and User's Guide)
Ÿ
Power Adapter (12V DC, 0.5A)
Ÿ
Network Cable (0.6m / 2ft.)

SystemRequirements
Web Browser: Internet Explorer (6 or higher), Firefox 2.0 or higher, Opera,
Ÿ
Chrome, Safari
Ÿ computer with a network adapter or wireless adapter properly installed
A
Ÿ router with an available network LAN port
A
Ÿ available DHCP Server – routers usually have a built-in DHCP server
An

1

2. Hardware Installation
Note:
1. Locate an optimum location for the Access Point.The best place for the Access Point
is usually at the center of your wireless network.
2. Disable any anti-virus and firewall programs before starting hardware installation.
For Windows Users
1. Insert Utility CD-ROM into your computer's
CD-ROM drive.

2. Click Run Setup.exe.

3. Click Setup Wizard.

4. Click I accept the terms in the License
Agreement and then click Next.

2

5.Connect the provided network cable from a
LAN port on your Router to the LAN port on the
TEW-637AP. Then click Next.

6. Connect a RJ-45 cable from a LAN port on your
Router to the Ethernet port on your computer.

7. Connect the Power Adapter to the Access Point
and then to a power outlet. Verify that the
power switch is set to the on position (EU
version only). Then click Next.

8.Select the TEW-637AP from the list and then
click Configure.

9. Enter a password and then click Login. The
default password is admin.

3

10. Select Dynamic IP Address Configuration
and then click Next.

11. Select Manual setup and then click Next.

12. Enter a SSID (Wireless Network Name) and
then click Next. By default, the SSID is
TRENDnet637. The SSID is the wireless
network nameof your wireless network (e.g.
wireless router or access point). Enter a
unique SSID. Choose something that you
would easily identify when searching for
available wireless networks.

13. Select a Security Mode and then click Next

4

Note:
1. To protect your network from any unauthorized access it is recommended to enable
wireless encryption.
2. The example below is forWPA-PSK/WPA2-PSK (AES) security. If you select
WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2.
If your wireless adapters do not support WPA or WPA2, then select WEP.
3. WEP encryption only supports 802.11b/g speed of up to 54Mbps.
4. Once encryption is enabled on the router, each wireless computer and device must
be configured with the same encryption key.

14. Select thedesired WPA mode, enter
characters for your Pre-Shared key and then
click Next. For WPA-PSK or WPA2-PSK, the
Pre-Shared Key must be between 8 and 63
ASCII or 64 HEX characters. Make sure to
copy down the Pre-Shared Key. You will need
the Pre-Shared Key when you configure your
wireless adapter(s).

15. Click Save (optional). This saves your
configuration settings in a file, which can beroloaded when needed.

16. Give the file a name, then click Save.

5

17. Click Next to apply the settings.

18. Click Exit.

21. Click Yes to exit.

Note: To connect a wireless computer to the TEW-637AP, please refer to the first
question in the troubleshooting section.
Your Installation is complete
For detailed information regarding the TEW-637AP’s configuration and advancedsettings,
please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or
TRENDnet's website at http://www.trendnet.com.

Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet

6

Troubleshooting
1. All the settings are correct,...