Drc800 remote control userguide

Motorola DRC800-resized.fm Page 1 Tuesday, January 6, 2009 1:56 PM

2.

Follow the diagram inside the battery case to insert the new batteries.

Press this Key

To…
Displays live television programming (only available with DVR models) Mute current audio feed Jump among preselected favorite channels (only available in CABLE mode)

Press this Key

To…
These functions are set by yourcable provider These functions are set by your cable provider These functions are set by your cable provider Enter a channel or device code number. To access channels lower than 100, you may need to enter 3 digits. For example, to access channel 2, press 0-0-2. For channel 22, press 0-2-2.

Motorola DRC800 4-in-1 Universal Remote Control

Note: Always use new, high quality replacementbatteries. Ensure that the batteries are not damaged before inserting them into the remote. You have ten minutes to replace the batteries before your remote loses memory.

3.

each device key light up, then the LED for the device you selected remains on. Enter the four-digit code. The device key LED turns off briefly after each key press.

DVD/VCR: TV: AUDIO: See “Checking Codes”for more informationon noting code sets.

The device key’s LED blinks three times, indicating it has unlocked the volume control for all devices.

REASSIGNING DEVICE KEYS
Each device key accesses a specific type of device (for example, the DVD/ VCR key can only be programmed to control a DVD player, VCR, DVR, or HTIB system). This makes it easier to search for a code if your device’s code does not appear on thelist provided. Your new remote allows you to change the type of device that may be assigned to a device key. That way, if you have two TVs, for example, you can control them both by changing the type of device the DVD/VCR or AUDIO key controls. 1. Press and hold the device mode key (TV, AUDIO, DVD/VCR, or Cable) corresponding to the type of device you want the reassigned key to control (forexample, TV) for at least six seconds. The LED for each device key lights up, then the key for the device you selected remains on. 2. Enter 9 9 2. 3. Press the device mode key you want to reassign (for example, AUDIO). That mode key’s LED blinks three times and turns off, indicating that it has been reassigned. The reassigned key automatically uses the same device code as the key you selected in Step 1.If your second device uses a different code, you may program it for the new code. See “Programming Device Control”.

USING YOUR REMOTE
To select a device to control, simply press one of the device mode keys (TV, AUDIO, DVD/VCR, CABLE) at the top of your remote. After you set up the remote to control that device, you may begin using the device. See “Programming Device Control” for moreinformation on identifying a specific device to a device key.

Note: Favorite
channels must be preselected through the Electronic Programming Guide before this key works. Display the help screen (only available in CABLE mode) Return to last selected channel VOL +/CH +/Increase or decrease volume Select the next or previous channel Move up or down through menu screens or the Electronic Program GuideExit any On-Screen Display (OSD) and return to regular viewing Display channel and program information Access the cable guide PIP Move PIP CH +/-

Input Aspect PIP ON/OFF

Select the video source Change the viewing aspect (if available) Turn Picture-inPicture (PIP) on or off (if available) Swap the PIP signal to the main display (if available) Move the position of the PIP display Select the nextor previous channel in the PIP display (the main display does not change)

Press this Key

To…
Turn the selected device ON or OFF

Note: You have 10 seconds to press each digit. If it takes longer than that, the remote “times out” and you must begin again. 4. If the remote recognizes the code, the device key’s LED blinks three times. You can now test the remote by pressing POWER. If your...