Dsl-264R

DSL-2640R
Quick Installation Guide+
Installations-Anleitung+
Guide d’installation+
Guía de instalación+
Guida di Installazione+
Installatiehandleiding+
Instrukcja instalacji+
Instalační příručka+
Telepítési Segédlet+
Installasjonsveiledning+
Installationsvejledning+
Asennusopas+
Installationsguide+
Guia de Instalação+
Οδηγός Γρήγορης Εγκατάστασης το+
Vodič za brzu instalaciju+Kratka navodila za namestitev+
Ghid de instalare rapidă+
1

Quick Installation Guide
DSL-2640R

WIRELESS G ADSL2+ MODEM ROUTER

Package Contents
If any of the items are missing, please contact your reseller.

DSL-2640R
WIRELESS G
ADSL2+ MODEM
ROUTER

CD-ROM
Ethernet (CAT-5e)
(D-Link Click’n Connect. Cable
Manual and Warranty)

Power Adapter

RJ-11 cable

Note :

DefaultIP: 192.168.1.1
Default Username: admin
Default Password: admin

Using a power supply with a different
voltage rating will damage and void the
warranty of this product.

Quick Installation

1

Remove the D-Link Click and
Connect CD.

2

A. Be sure your Internet connection
is active. DO NOT plug the router
in yet.
B. Insert the D-Link Click’n Connect CD
into your computer.

23

Click

Troubleshooting

1. How do I configure my DSL-2640R router without the CD, or check my
Wireless Network Name (SSID) and Wireless Encryption Key?
• Connect your PC to the router using an Ethernet cable.
• Open a web browser and enter the address http://192.168.1.1
• The default username is ‘admin’. The default password is also ‘admin’.
• If you have changed the passwordand can not remember it, you will need to reset the router
to the factory default setting (steps in question 2), which will set the password back to ‘admin’.
2. How do I reset my router to the factory default settings?
• Ensure the router is powered on.
• Press and hold the reset button on the back of the device for approximately 6-8 seconds.
• The process would take about 30 seconds tocomplete.
Note: Resetting the router to the factory default will erase the current configuration settings.
To reconfigure your settings, log into the router as outlined in question 1, then run the Setup
Wizard.
3. How do I add a new wireless client or PC if I have forgotten my Wireless
Network Name (SSID) or Wireless Encryption Key?
• For every PC that needs to connect to the router wirelessly, youwill need to ensure you use
the same Wireless Network Name (SSID) and encryption key as the DSL router has.
• Use the web based user interface (as described in question 1 above) to check or choose your
wireless settings.
• Make sure you take a note of the settings so that you can enter them into each wirelessly
connected PC. D-Link has provided a handy sticker for you to note them down andattach to
your router, or other location you find most convenient.
4. What can I do if my router is not working correctly?
• The manual contains a full troubleshooting section and can be downloaded from the D-Link
website (see below), however there are a few quick steps you can take to try and resolve any
issues:
• Check the LED’s on the front of the router. The Power, WLAN, DSL and InternetLED should
be on. One or more of the LAN LED should flash.
• Check that all the cables are firmly connected at both ends.
• Power the router off for 20 seconds, and then power it back on.
5. Why can I not get an Internet Connection?
• For ADSL ISP users please contact your ISP to make sure the service has been enabled/
connected by your ISP and that your ISP username and password arecorrect.
Technical Support
Thank you for choosing D-Link products. For further information, support, product updates or to
download the User Manual please visit the D-Link website at www.dlink.eu.

w ww.dlink.co.uk
: 08456 12 0003
3

Important Information
Important information regarding your internet subscription

Users who subscribe to limited or “pay as you use” broadband internet...