El Cristianismo
Páginas: 2 (287 palabras)
Publicado: 30 de octubre de 2012
BUZZ GENERATOR ADAPTER
Parameter Sliders
The sliders are used to control Buzz machine parameters. They are exposed as normal fruityloops parameters.
Velocity ModulationKnobs
These Knobs located left to the parameter sliders control the amount of modulation the NoteOn velocity adds to the parameter. Most often they are used to control the volume orvelocity parameter. Some parameters can only be modulated when machine is in monophonic mode (polyhony=1).
Parameter Popup Menu (right click on a parameter)
Send with Note OnMessages - If checked, the parameter is always sent with a note on message. It's needed for example for note length parameters for some machines.
Quadratic Modulation - Use quadraticvelocity modulation instead of linear. Useful for converting MIDI velocity to linear amplitude.
Note Parameter
The adapter routes all incoming Note On messages to this parameterunless Use MidiNote() is checked.
Polyphony
Number of machine tracks to use for note on messages. Maximum available polyphony depends on the machine.
Use MidiNote()
Some Buzzmachines support this function as an alternative to normal note parameters. It's usually a better choice if the machine supports it. Note that the machine handles the voice allocationif this setting is used. The polyphony may or may not be configurable in the attributes dialog. You may also need to set the MIDI input channel to 1 in the machine attributes if it'snot set by default.
Don't Send Note Offs
All Buzz machines don't like the Note Off messages so they can be disabled with this checkbox.
Attributes
More settings for somemachines
Commands
More commands for some machines
Frequency Asked Questions
Why does machine XYZ click when I play it?
It also clicks in Buzz. It's part of it's sound.
Parameter Sliders
The sliders are used to control Buzz machine parameters. They are exposed as normal fruityloops parameters.
Velocity ModulationKnobs
These Knobs located left to the parameter sliders control the amount of modulation the NoteOn velocity adds to the parameter. Most often they are used to control the volume orvelocity parameter. Some parameters can only be modulated when machine is in monophonic mode (polyhony=1).
Parameter Popup Menu (right click on a parameter)
Send with Note OnMessages - If checked, the parameter is always sent with a note on message. It's needed for example for note length parameters for some machines.
Quadratic Modulation - Use quadraticvelocity modulation instead of linear. Useful for converting MIDI velocity to linear amplitude.
Note Parameter
The adapter routes all incoming Note On messages to this parameterunless Use MidiNote() is checked.
Polyphony
Number of machine tracks to use for note on messages. Maximum available polyphony depends on the machine.
Use MidiNote()
Some Buzzmachines support this function as an alternative to normal note parameters. It's usually a better choice if the machine supports it. Note that the machine handles the voice allocationif this setting is used. The polyphony may or may not be configurable in the attributes dialog. You may also need to set the MIDI input channel to 1 in the machine attributes if it'snot set by default.
Don't Send Note Offs
All Buzz machines don't like the Note Off messages so they can be disabled with this checkbox.
Attributes
More settings for somemachines
Commands
More commands for some machines
Frequency Asked Questions
Why does machine XYZ click when I play it?
It also clicks in Buzz. It's part of it's sound.
Leer documento completo
Regístrate para leer el documento completo.