Electronica
OptiX 155/622H(Metro1000) TM
C.1.2 Mean Launched Power
The mean launched power at reference point S is the average power of a pseudo-random data sequence coupled into the fiberby the transmitter. Table C-4 shows the mean launched power of each optical interface provided by the OptiX 155/622H.
Table C-4 Mean launched power
Optical interface level
ATM OpticalInterface(STM-1)
ATM FORUM AF-UNI-011-047
ATM FORUM AFUNI-011-047
Optical interface type
I-1 S-1.1 Ie-1
Standard specifications (dBm)
-20 ~ -14 -15 ~ -8 -22~ -14 -15 ~ -8 -5 ~ 0 -5 ~ 0 -20 ~-14 -15 ~-8 -3 ~ +2 -3 ~ +2
Test result
Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass
STM-1
ITU-T
S-1.1 L-1.1 L-1.2 Ie-4
STM-4
ITU-T
S-4.1 L-4.1 L-4.2
C.1.3 Extinction Ratio (EX)The extinction ratio refers to the ratio between the average optical power of the transmitted signal (reflected optical signal) and that of the empty signal (non-reflected optical signal) in the caseof the worst reflection condition and full modulation. The extinction ratio indices for each optical interface provided by the OptiX 155/622H are shown in Table C-5.
C-5
Specifications
TableC-5 Extinction ratio
OptiX 155/622H(Metro1000) TM
Optical interface level
ATM Optical Interface (STM-1)
Optical interface type
I-1 S-1.1 Ie-1
Standard specification (dB)
> 10 > 8.2 >8.2 > 8.2 > 10 > 10 >8.2 > 8.2 > 10 > 10
Test result
pass Pass Pass Pass Pass Pass Pass Pass Pass Pass
STM-1
S-1.1 L-1.1 L-1.2 Ie-4
STM-4
S-4.1 L-4.1 L-4.2
C.1.4 Receiver Sensitivity(BER=1×10-10)
The receiver sensitivity refers to the minimum mean optical power received at the reference point R for achieving the stipulated bit error rate (BER=1×10-10). The receiver sensitivityspecifications for each optical interface provided by the OptiX 155/622H are shown in Table C-6.
C-6
Specifications
Table C-6 Receiver sensitivity
OptiX 155/622H(Metro1000) TM
Optical...
Regístrate para leer el documento completo.