Electronica

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
1N4004 and 1N4007 are Preferred Devices

Axial Lead Standard Recovery Rectifiers
This data sheet provides information on subminiature size, axial lead mounted rectifiers for general–purpose low–power applications.
Mechanical Characteristics

http://onsemi.com

• Case: Epoxy, Molded • Weight: 0.4 gram (approximately) • Finish: AllExternal Surfaces Corrosion Resistant and Terminal • • • • • •
Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 220°C Max. for 10 Seconds, 1/16″ from case Shipped in plastic bags, 1000 per bag. Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to the part number Available in Fan–Fold Packaging, 3000 per box, by adding a “FF” suffix to thepart number Polarity: Cathode Indicated by Polarity Band Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

LEAD MOUNTED RECTIFIERS 50–1000 VOLTS DIFFUSED JUNCTION

CASE 59–03 AXIAL LEAD PLASTIC

MARKING DIAGRAM
AL 1N 400x YYWW AL = Assembly Location 1N400x = Device Number x = 1, 2, 3, 4, 5, 6 or 7 YY = Year WW = Work Week 1N4004 400 1N4005 600 1N4006 800 1N4007 1000 UnitVolts

MAXIMUM RATINGS
Rating *Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage *Non–Repetitive Peak Reverse Voltage (halfwave, single phase, 60 Hz) *RMS Reverse Voltage *Average Rectified Forward Current (single phase, resistive load, 60 Hz, TA = 75°C) *Non–Repetitive Peak Surge Current (surge applied at rated load conditions) Operating and Storage JunctionTemperature Range *Indicates JEDEC Registered Data Symbol VRRM VRWM VR VRSM VR(RMS) IO 1N4001 50 1N4002 100 1N4003 200

60 35

120 70

240 140

480 280 1.0

720 420

1000 560

1200 700

Volts Volts Amp

IFSM

30 (for 1 cycle)

Amp

TJ Tstg

–65 to +175

°C

ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of this data sheet. Preferreddevices are recommended choices for future use and best overall value.

© Semiconductor Components Industries, LLC, 2001

1

March, 2001 – Rev. 7

Publication Order Number: 1N4001/D

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
ELECTRICAL CHARACTERISTICS*
Rating Maximum Instantaneous Forward Voltage Drop (iF = 1.0 Amp, TJ = 25°C) Maximum Full–Cycle Average Forward Voltage Drop(IO = 1.0 Amp, TL = 75°C, 1 inch leads) Maximum Reverse Current (rated dc voltage) (TJ = 25°C) (TJ = 100°C) Maximum Full–Cycle Average Reverse Current (IO = 1.0 Amp, TL = 75°C, 1 inch leads) *Indicates JEDEC Registered Data Symbol vF VF(AV) IR 0.05 1.0 IR(AV) – 10 50 30 µA Typ 0.93 – Max 1.1 0.8 Unit Volts Volts µA

ORDERING & SHIPPING INFORMATION
Device 1N4001 1N4001FF 1N4001RL 1N40021N4002FF 1N4002RL 1N4003 1N4003FF 1N4003RL 1N4004 1N4004FF 1N4004RL 1N4005 1N4005FF 1N4005RL 1N4006 1N4006FF 1N4006RL 1N4007 1N4007FF 1N4007RL Package Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Shipping 1000Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel

http://onsemi.com
2

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006,1N4007
PACKAGE DIMENSIONS AXIAL LEAD CASE 59–03 ISSUE M

B

K F

D

NOTES: 1. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY. 2. POLARITY DENOTED BY CATHODE BAND. 3. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. DIM A B D F K MILLIMETERS MIN MAX 4.07 5.20 2.04 2.71 0.71 0.86 --1.27 27.94 --INCHES MIN MAX 0.160 0.205 0.080 0.107 0.028 0.034 --0.050 1.100 ---

A F K...