enquique
Páginas: 9 (2035 palabras)
Publicado: 6 de octubre de 2014
Ordering number : ENN7061A
Thick-Film Hybrid IC
STK402-030
Two-Channel Class AB Audio Power Amplifier IC
20 W + 20 W
Overview
Package Dimensions
The STK402-000 series products are audio power
amplifier hybrid ICs that consist of optimally-designed
discrete component power amplifier circuits that have
been miniaturized using SANYO's unique insulated metal
substrate technology(IMST). SANYO has adopted a new
low thermal resistance substrate in these products to
reduce the package size by about 60% as compared to the
earlier SANYO STK407-000 series.
unit: mm
4189-SIP15
[STK402-030]
Features
• Series of pin compatible power amplifiers ranging from
20 W × 2 channels to 120 W × 2 channels (10%/1 kHz)
devices. The same printed circuit board can be useddepending on the output power grade.
• The pin arrangement is compatible with that of the 3channel STK402-200 series. This means that 3-channel
printed circuit boards can also be used for 2-channel
products.
• Miniature packages
— 15 W/ch to 40 W/ch (THD = 0.4%, f = 20 Hz to
20 kHz); 46.6 mm × 25.5 mm × 8.5 mm *
— 50 W/ch to 80 W/ch (THD = 0.4%, f = 20 Hz to
20 kHz); 59.2 mm × 31.0 mm × 8.5 mm **: Not including the pins.
• Output load impedance: RL = 6 Ω
• Allowable load shorted time: 0.3 seconds
• Supports the use of standby, muting, and load shorting
protection circuits.
SANYO: SIP15
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems,aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, evenmomentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D1602AS (OT) No. 7061-1/5
STK402-030
Series Organization
Theseproducts are organized as a series based on their output capacity.
Type No.
Item
STK402-020
STK402-030
STK402-040
STK402-050
STK402-070
20 W + 20 W
30 W + 30 W 40 W + 40 W
45 W +45 W
60 W + 60 W 80 W + 80 W 100 W + 100 W 120 W + 120 W
Output 2 (0.4%/20 Hz to 20 kHz) 15 W + 15 W
20 W + 20 W 25 W + 25 W
30 W + 30 W
40 W + 40 W 50 W + 50 W
Output 1 (10%/1kHz)
STK402-090
STK402-100
STK402-120
60 W + 60 W 80 W + 80 W
Maximum supply voltage
(No signal)
±30 V
±34 V
±38 V
±40 V
±50 V
±54 V
±57 V
±65 V
Maximum supply voltage
(6 Ω)
±28 V
±32 V
±36 V
±38 V
±44 V
±47 V
±50 V
±57 V
Recommended supply voltage
(6 Ω)
±19 V
±22 V
±25 V
±26.5 V
±30 V
±32 V
±35 V
±39 V46.6 mm × 25.5 mm × 8.5 mm
Package
59.2 mm × 31.0 mm × 8.5 mm
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage (No signal)
VCC max(0)
±34
Maximum supply voltage
VCC max(1) RL = 6 Ω
±32
V
3.6
°C/W
θj-c
Thermal resistance
Junction temperature
Tj max
Operating IC substratetemperature
Tc max
Storage temperature
Per power transistor
150
ts
°C
125
°C
–30 to +125
°C
Both the Tj max and the Tc max conditions must be met.
Tstg
Allowable load shorted time *2
V
VCC = ±22.0 V, RL = 6 Ω, f = 50 Hz, PO = 20 W
0.5
s
Operating Characteristics at Tc = 25°C, RL = 6 Ω (noninductive load), Rg = 600 Ω, VG = 30 dB
Parameter...
Thick-Film Hybrid IC
STK402-030
Two-Channel Class AB Audio Power Amplifier IC
20 W + 20 W
Overview
Package Dimensions
The STK402-000 series products are audio power
amplifier hybrid ICs that consist of optimally-designed
discrete component power amplifier circuits that have
been miniaturized using SANYO's unique insulated metal
substrate technology(IMST). SANYO has adopted a new
low thermal resistance substrate in these products to
reduce the package size by about 60% as compared to the
earlier SANYO STK407-000 series.
unit: mm
4189-SIP15
[STK402-030]
Features
• Series of pin compatible power amplifiers ranging from
20 W × 2 channels to 120 W × 2 channels (10%/1 kHz)
devices. The same printed circuit board can be useddepending on the output power grade.
• The pin arrangement is compatible with that of the 3channel STK402-200 series. This means that 3-channel
printed circuit boards can also be used for 2-channel
products.
• Miniature packages
— 15 W/ch to 40 W/ch (THD = 0.4%, f = 20 Hz to
20 kHz); 46.6 mm × 25.5 mm × 8.5 mm *
— 50 W/ch to 80 W/ch (THD = 0.4%, f = 20 Hz to
20 kHz); 59.2 mm × 31.0 mm × 8.5 mm **: Not including the pins.
• Output load impedance: RL = 6 Ω
• Allowable load shorted time: 0.3 seconds
• Supports the use of standby, muting, and load shorting
protection circuits.
SANYO: SIP15
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems,aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, evenmomentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D1602AS (OT) No. 7061-1/5
STK402-030
Series Organization
Theseproducts are organized as a series based on their output capacity.
Type No.
Item
STK402-020
STK402-030
STK402-040
STK402-050
STK402-070
20 W + 20 W
30 W + 30 W 40 W + 40 W
45 W +45 W
60 W + 60 W 80 W + 80 W 100 W + 100 W 120 W + 120 W
Output 2 (0.4%/20 Hz to 20 kHz) 15 W + 15 W
20 W + 20 W 25 W + 25 W
30 W + 30 W
40 W + 40 W 50 W + 50 W
Output 1 (10%/1kHz)
STK402-090
STK402-100
STK402-120
60 W + 60 W 80 W + 80 W
Maximum supply voltage
(No signal)
±30 V
±34 V
±38 V
±40 V
±50 V
±54 V
±57 V
±65 V
Maximum supply voltage
(6 Ω)
±28 V
±32 V
±36 V
±38 V
±44 V
±47 V
±50 V
±57 V
Recommended supply voltage
(6 Ω)
±19 V
±22 V
±25 V
±26.5 V
±30 V
±32 V
±35 V
±39 V46.6 mm × 25.5 mm × 8.5 mm
Package
59.2 mm × 31.0 mm × 8.5 mm
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage (No signal)
VCC max(0)
±34
Maximum supply voltage
VCC max(1) RL = 6 Ω
±32
V
3.6
°C/W
θj-c
Thermal resistance
Junction temperature
Tj max
Operating IC substratetemperature
Tc max
Storage temperature
Per power transistor
150
ts
°C
125
°C
–30 to +125
°C
Both the Tj max and the Tc max conditions must be met.
Tstg
Allowable load shorted time *2
V
VCC = ±22.0 V, RL = 6 Ω, f = 50 Hz, PO = 20 W
0.5
s
Operating Characteristics at Tc = 25°C, RL = 6 Ω (noninductive load), Rg = 600 Ω, VG = 30 dB
Parameter...
Leer documento completo
Regístrate para leer el documento completo.