Especificaciones de diodos

1N4001 THRU 1N4007
PLASTIC SILICON RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES l Low forward voltage drop l High current capability l High reliability l High surge currentcapability l Exceeds environmental standards of MIL-S-19500/228 MECHANICAL DATA Case: Molded plastic , DO-41 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method208 guaranteed Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unlessotherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS Maximum RecurrentPeak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 75 140 280 420 560 700 V Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified 1.0 ACurrent .375"(9.5mm) Lead Length at TA=75 ¢J Peak Forward Surge Current 8.3ms single 30 A half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.0A DC and 1.1 V 25 ¢J MaximumFull Load Reverse Current Full 30 £g A Cycle Average at 75 ¢J Ambient 5.0 £g A Maximum Reverse Current at TA=25 ¢J 500 £g A At Rated DC Blocking Voltage TA=100 ¢J Typical Junction capacitance (Note 1)15 PF Typical Thermal Resistance (Note 2) R £KJA 50 ¢J /W 25 ¢J /W Typical Thermal resistance (NOTE 2) R £K JL Operating and Storage Temperature Range -55 to +150 ¢J TJ,TSTG NOTES: 1. Measured at 1MHz and applied reverse voltage of 4.0 VDC. 2. Thermal Resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted.

DO-41

RATING AND CHARACTERISTIC CURVES1N4001 THRU 1N4007
AVERAGE FORWARD RECTIFIED
1.6 1.4
MAXIMUM AVERAGE CURRENT RATING SINGLE HALF-WAVE, 60Hz RESISTIVE OR INDUCTIVE LEAD LENGTHS

CURRENT AMPERES

1.2 1.0 .8 .6 .4 .2 0 0 20 40...