Estaidtica
PRODUCTS
APPLICATIONS
INDEX
SELECTION GUIDE
RGB Digital Fiberoptic Sensors
Description
A revolutionary detection method ensures the highest stability
The CZ-K Series is a technological breakthrough in photoelectric sensors. Detection is based on RGB color components, a superior method to the conventional light quantity receiving method.
CZ-K Series
Features
GRGB three-light source G Wide detection range of 70 ±20 mm 2.75" ±0.78" G High-speed response of 300 µs G Water-resistant sensor head IP-67 rated
Detecting Distance
Long detection distance – 70 ± 20 mm (2.75" ± 0.78") Small beam spot – 16 ± 4 mm (0.63" ± 0.16")
Long distance and wide-range detection
The CZ-K Series is mounted at a distance from the target enabling accurate detection ofvibrating targets. The sensor position does not need adjusting even when the target size changes.
Ev e 70 2. 76" ± n Vibrating Ta rge 20 m m 0. ts 79"
-20 m
+20
m --0
.79"
mm
+0.7 9"
1-mm 0.04" beam spot model available
The CZ-41 features a beam spot diameter of 1 mm 0.04" at a distance of 16 mm. Even minute marks can be reliably detected.
One press of a button automaticallysets the optimal sensitivity
To set sensitivity, simply push the “SET” button once. Workpieces can now be accurately detected. The CZ-K Series recognizes color components instantly and automatically sets the optimal sensitivity (one-point tuning).
Eight-color registration and external tuning functions
The CZ-K Series can register eight setting values in advance and switches them based onexternal signals. In addition, the CZ-K Series features an “external tuning” function that allows sensitivity settings to be performed remotely. These functions enable smooth product changeover.
170
MAIN MENU
PRODUCTS
APPLICATIONS
INDEX
SELECTION GUIDE
RGB Digital Fiberoptic Sensors
CZ-K
Applications
Ridge detection on cans
Detection of glue on cardboard
Detection of“defective” marks on PC boards
Detection of mark on tubes
Specifications
Fiber unit
Type Model Detection range Smallest spot diameter Minimum bend radius Enclosure rating Ambient temperature Fiber length Housing material Weight Reflective Long detection distance CZ-40 70 ±20 mm 2.76" ±0.79" 6 mm 0.24" dia. R25 mm 0.98" IP-67 -40 to +70°C 2 m (free-cut) 6.6' Polyarylate Approx. 27 g Smallbeam spot CZ-41 16 ±4 mm 0.63" ±0.16" 1 mm 0.04" dia. R15 mm 0.59" IP-67 -40 to +70°C 2 m (free-cut) 6.6' Polyarylate Approx. 27 g
Amplifier unit
Model Light source Response time Indicators Error indication Calibration method Tolerance value adjustment Differentiation mode Timer function Output selection External synchronization input External calibration input Registered color selection Controloutput Protection circuit Power supply Current consumption Ambient light Ambient temperature 1. Housing material Weight (including 2-m 6.6' cable) NPN PNP CZ-K1 CZ-K1P Red LED, Green LED, Blue LED 300 µs/1 ms (switch-selectable) Output: Red LED, Calibration: Orange LED, External synchronization input: Green LED, Matching rate/received light intensity: LCD (Red/Green) Excess light intensity,insufficient light intensity, insufficient color difference 1-point/2-point calibration (switch-selectable) Numerical value setting on digital display C mode/C + I mode/I mode (switch-selectable) OFF-delay timer (40 ms)/Timer OFF (switch-selectable) Match output: Turns on when target color matches registered color. Mismatch output: Turns on when target color is different from registered color.(switch-selectable) Non-voltage input, Response speed: 500 µs max. Non-voltage input, Input response time: 20 ms min. 8-bank selection (By external input or key operation), Non-voltage input, Input response time: 20 ms min. NPN: 40 VDC max. (100 mA max.), Residual voltage: 1.0 V max. Reverse-polarity protection (power supply), overcurrent protection (output), surge absorber (output) 12 to 24 VDC ±10%...
Regístrate para leer el documento completo.