Estudiante

Drivers installation

1. Please, follow instruction exactly like described below
2. Do not connect box/dongle to PC before installation
Note: "x:" means drivewhere Infinity-Box was installed (f.e. "C:" or "D:")


W2K/XP/Vista

1. Run: x:\Program Files\InfinityBox\Drivers\Box\e-gate_W2k_XP_Vista\Setup_W2k_XP.exe orSetup_Vista.exe
2. Connect box (dongle) to PC USB port, your system have three new devices:
1. e-gate Virtual Reader Enumerators -> e-gate Virtual ReaderEnumerator
2. Smart card readers -> e-gate USB Smart card reader
3. e-gate USB Smart Cards -> e-gate USB Smart Card
3. Connect box to PC USB port and select drivers:x:\Program Files\InfinityBox\Drivers\Box\FTDI


W98/ME

1. Run: x:\Program Files\InfinityBox\Drivers\Box\VC6Redist\vcredist.exe
2. Reboot PC
3. Run:x:\Program Files\InfinityBox\Drivers\Box\Smart Card Base Components\SCBase.exe
4. Reboot PC
5. Run: x:\Program Files\InfinityBox\Drivers\Box\e-gate_W98_Me\Setup.exe
6.Reboot PC
7. Connect box (dongle) to PC USB port, your system have three new devices:
1. e-gate Virtual Reader Enumerators -> e-gate Virtual Reader Enumerator2. Smart card readers -> e-gate USB Smart card reader
3. e-gate USB Smart Cards -> e-gate USB Smart Card
8. Connect box to PC USB port and select drivers:x:\Program Files\InfinityBox\Drivers\Box\FTDI
9. Reboot PC


Check installation results

Open "Device Manager" and check that the next devices exist in system:Note: COM port No can be different than on picture above. Please, remember COM port No in your system and select it when you start Infinity-Box software.