Examen

ENetwork Basic Configuration PT Practice SBA

A few things to keep in mind while completing this activity:

Do not use the browser Back button or close or reload any exam windows during theexam.
Do not close Packet Tracer when you are done. It will close automatically.
Click the Submit Assessment button to submit your work.
Introduction
In this practice Packet Tracer Skills Exam, youwill:
design and implement an addressing scheme to meet stated requirements
configure, verify, and troubleshoot connectivity between all devices in the network
Addressing Table
Device
InterfaceAddress
Subnet Mask
Default Gateway
Router1
Fa0/0


n/a
Fa0/1
172.16.1.33
255.255.255.240
n/a
Switch1
VLAN1



PC1
NIC



PC2
NIC
Preconfigured
PreconfiguredPreconfigured
NOTE: The initial network has some errors. To aid in configuring and verifying the devices, as well as in troubleshooting the existing errors, use a printed version of these instructions tofill in the missing address information in the table during Step 1.

Step 1: Determine the IP Addressing Scheme.

Design an addressing scheme and fill in the Addressing Table based on thefollowing requirements:

a. Subnet the address space 172.16.1.0/24 to provide 30 host addresses for LAN 1 while wasting the least amount of address space.

b. Assign the first available subnet toLAN 1.

c. Assign the lowest (first) host address in this subnet to the Fa0/0 interface on Router1.

d. Assign the second address in this subnet to the VLAN 1 interface on Switch1.

e.Assign the highest (last) host IP address in this subnet to PC1.

Step 2: Configure Router1.

a. Configure Router1 with these basic parameters:

· Use Router1 as the router name.· Use class as the encrypted password for privileged EXEC mode.

· Require password-protected logins for the console line. Use cisco as the password.

· Require...