Fallas impresoras

Table of Contents
Click on a model below to view the error codes BJ-200e BJ-200ex BJ-30 BJ-300 BJ-330 BJC-200 BJC-2000 BJC-2010 BJC-210 BJC-240 BJC-4000 BJC-4100 BJC-4200 BJC-4300 BJC-4550 BJC-50 BJC5000 BJC5100 BJC-55 BJC-600 BJC-600e BJC-6000 BJC-6010 BJC-610 BJC-70 BJC-7000 BJC-7004 BJC-80 BJC-8000 BJC-8200 BJC-85, BJC-85W i320 i470D I550 i560 i70 I850 i9100 I950 S450 S500 S520 S530D S600S630 S630N S750 S800 S820 S820D S820MG S830D S900 S9000

BJ-200
ERROR POWER ON LINE HS HQ ERROR BEEPER

Paper pick-up error Paper jam Carriage control error Cleaning error Temperature Sensor error ROM/RAM error
Back to Table of Content

___ ___ ___ ___ ___ ___

___ ___ Flashing Flashing Flashing Flashing

___ ___ Flashing Flashing Flashing Flashing

___ ___ Flashing Flashing FlashingFlashing

Lit Lit Lit Lit Lit Lit

Three beeps Four beeps Three beeps Four beeps Five beeps Six beeps

BJ-200e, BJ-200ex
ERROR Paper pick-up error Paper jam Carriage control error Cleaning error Temperature Sensor error ROM/RAM error ROM unmatch
Back to Table of Content

POWER ___ ___ ___ ___ ___ ___ ___

ON LINE ___ ___ Flashing Flashing Flashing Flashing ___

HS ___ ___ FlashingFlashing Flashing Flashing ___

HQ ___ ___ Flashing Flashing Flashing Flashing ___

ERROR Lit Lit Lit Lit Lit Lit Lit

BEEPER Three beeps Four beeps Three beeps Four beeps Five beeps Six beeps ___

BJ-30, BJC-70
ERROR STATE Paper pickup error Paper jam error BJ cartridge installation error BJ cartridge mis-match error Waste ink absorber warning Low battery warning Cartridge leave warningCODE E1 E2 E6 E8 C1 C5 C 6 / Bk Blinks BEEP 2x 2x 2x 2x 2x 2x 2x DESCRIPTION Occurs when the paper cannot be fed properly. Occurs when the paper sensor detects a paper longer than 20 inches. Occurs when the printer does not detect the BJ cartridge. (A bad printhead is possible.) Occurs when a color BJ cartridge is installed or when the black BJ cartridge is not recognized. Install or replace aBC-10. Occurs when the remaining capacity of the absorber is 1%. Press ON LINE to resume. F14 error may occur soon. Occurs when the input voltage is 11.1 to 11.8 VDC. Normal voltage is 13VDC +2.5VDC 1.5VDC. Occurs when the cartridge is in the replacement mode for 5 minutes or longer. Displayed when ink low warning function is enabled. Occurs when the calculated ink consumption exceeds the maximumvalue in EEPROM. The cartridge may be out of ink. Replace the ink cartridge and reset the ink low warning by pressing the MENU button once. Occurs when battery power is low. Occurs when the result of the ROM check during the initializing operation fails. Occurs when the result of the RAM check during the initializing operation fails. Occurs when data cannot be written into the EEPROM. Occurs when thehome position cannot be detected. Occurs when the print position correction cannot be detected. (Irregularity in the carriage movement.) Occurs when the input voltage is incorrect. (The power adapter or battery may be bad.) Occurs when the temperature sensor's reading on the logic board is abnormal. (A bad printhead is possible.) Occurs when the temperature of the diode sensor in the BJ cartridgehead exceeds the prescribed level. (A bad printhead is possible.) Occurs when the printer does not detect the cartridge in a position other than BJ cartridge removal position. (A bad printhead is possible.) Occurs when the "total waste ink amount" recorded by the EEPROM exceeds the prescribed limit. Waste ink absorber pad may need to be replaced and the counter needs to be reset.

Ink lowwarning

Bk Blinks

2x

Low battery error (w/battery) ROM error RAM error EEPROM error Home position sensor error Print position correction error Low battery error (w/AC adapter) Internal temperature sensor error Abnormal temperature rise No head installation error

Fc F 1A F 1b F 1C F1 F3 Fc F 11 F 12 F 13

5 seconds 5 seconds 5 seconds 5 seconds 5 seconds 5 seconds 5 seconds 5 seconds 5...