Festo Valves
Páginas: 50 (12286 palabras)
Publicado: 21 de mayo de 2012
The FESTO IPC concept
Thanks to the modular design of the FESTO IPC concept induvidual system components can be suited to very different areas of application. The system's modularity combines minimal space requirements with high PC capacity and low purchasing and maintenance costs. Existing systems are freely extendible should requirements increase, but costs are minimised as only modules whichare to be used are necessary. The modularity of the system guarantees minimal logistic requirements as all systems use the same basic building blocks (busboard, CPU, I/O, and communication modules). Special requirements such as integration into existing field bus systems are not a problem for the FESTO IPC concept. The current range of more than 80 modules fulfils almost every need. Thanks to thesimple and robust plug-in system, users can install or exchange individual components in seconds without the need for dealing with special complex wiring or the removal of the housing. The ease of handling means that the costs and time required for servicing and training are minimised. The many uses of the modules and the software are not limited to one particular system. They can be rearranged inany combination to develop modified or completely new possibilities for use. The design of the modules is strictly geared to meet the demands of industry (demonstrated by the durable aluminium housing) and guarantees full compatibility with today's mechanical and electrical environment. All the main plugs in the FESTO IPC are in accordance with the standard for industrial PCs. The use ofexpensive special cables with unusual pin allocations has been avoided.
The CPU modules E.IPC- HC15 / HC16 / HC17
q
The computer unit of your FESTO IPC concept is software and socket compatible to the world-wide PC/XT standard, operating system MS-DOS 3.3-6.2, DR-DOS 6.0, NovellDOS 7 or QNX 2.25 High capacity C&T processor F8680 PC/CHIP (14 MHz, 3 MIPS, Landmark 19) with 16 bit memory access, 1MB main memory (computing speed comparable to 386SX systems). CGA/LCD graphic adapter to connect to screen or LC display. Serial interface module (RS232, RS232 opto, RS422, RS485). Multiprocessor capable via software controlled decoupling from the PC/XT bus. ROM disk with up to 896 KB capacity or RAM/Flash disk with up to 512 KB. Secure attachment and high noise immunity thanks to screenedelectronics in an aluminium housing and electronics design conforming to EMC requirements. Any PC compatible computer with CGA, EGA or VGA graphics can be used as a development system.
q
q q q q q
q
HC15FEEN
Version 3.1 as of 31.10.95
Page 1
Page 2
HC15FEEN
Version 3.1 as of 31.10.95
The CPU modules E.IPC-HC1X The Heart of every FESTO IPC concept is the CPU. The PCcompatible CPU modules E.IPCHC1X unite the CGA graphic controller, 1 MB main memory, an integrated serial interface module with RS232 standart adapter (fitted as required with RS422, RS485 or customerspecific), an I²C bus controller and a bootable silicon disk (max. 896 KB) in one housing. This is all controlled by a high capacity single chip processor F8680 (PC/Chip) by C&T. The 16 bit memory access andthe modern design put the 8086 compatible processor with 2 MIPS in the same performance class as the 20286 and 80386SX computers. The user has the free choice of the largest software stock in the world. With the PLC programming systems which are available, LogiCAD, Festo FST and PLC emulator, the CPU module can also be programmed and used like a PLC. Due to decoupling from the PC/XT bus of thebusboards, the CPU modules become capable of multiprocessing and can be operated in master/slave mode with other E.IPC-HC1X CPU modules. Here the I²C bus with a transfer rate of up to 90 KBit/s controls communication between the master and slave modules or between external customer-specific I²C modules. Several FESTO IPC concepts can be linked via the external I²C bus within one device or one...
Thanks to the modular design of the FESTO IPC concept induvidual system components can be suited to very different areas of application. The system's modularity combines minimal space requirements with high PC capacity and low purchasing and maintenance costs. Existing systems are freely extendible should requirements increase, but costs are minimised as only modules whichare to be used are necessary. The modularity of the system guarantees minimal logistic requirements as all systems use the same basic building blocks (busboard, CPU, I/O, and communication modules). Special requirements such as integration into existing field bus systems are not a problem for the FESTO IPC concept. The current range of more than 80 modules fulfils almost every need. Thanks to thesimple and robust plug-in system, users can install or exchange individual components in seconds without the need for dealing with special complex wiring or the removal of the housing. The ease of handling means that the costs and time required for servicing and training are minimised. The many uses of the modules and the software are not limited to one particular system. They can be rearranged inany combination to develop modified or completely new possibilities for use. The design of the modules is strictly geared to meet the demands of industry (demonstrated by the durable aluminium housing) and guarantees full compatibility with today's mechanical and electrical environment. All the main plugs in the FESTO IPC are in accordance with the standard for industrial PCs. The use ofexpensive special cables with unusual pin allocations has been avoided.
The CPU modules E.IPC- HC15 / HC16 / HC17
q
The computer unit of your FESTO IPC concept is software and socket compatible to the world-wide PC/XT standard, operating system MS-DOS 3.3-6.2, DR-DOS 6.0, NovellDOS 7 or QNX 2.25 High capacity C&T processor F8680 PC/CHIP (14 MHz, 3 MIPS, Landmark 19) with 16 bit memory access, 1MB main memory (computing speed comparable to 386SX systems). CGA/LCD graphic adapter to connect to screen or LC display. Serial interface module (RS232, RS232 opto, RS422, RS485). Multiprocessor capable via software controlled decoupling from the PC/XT bus. ROM disk with up to 896 KB capacity or RAM/Flash disk with up to 512 KB. Secure attachment and high noise immunity thanks to screenedelectronics in an aluminium housing and electronics design conforming to EMC requirements. Any PC compatible computer with CGA, EGA or VGA graphics can be used as a development system.
q
q q q q q
q
HC15FEEN
Version 3.1 as of 31.10.95
Page 1
Page 2
HC15FEEN
Version 3.1 as of 31.10.95
The CPU modules E.IPC-HC1X The Heart of every FESTO IPC concept is the CPU. The PCcompatible CPU modules E.IPCHC1X unite the CGA graphic controller, 1 MB main memory, an integrated serial interface module with RS232 standart adapter (fitted as required with RS422, RS485 or customerspecific), an I²C bus controller and a bootable silicon disk (max. 896 KB) in one housing. This is all controlled by a high capacity single chip processor F8680 (PC/Chip) by C&T. The 16 bit memory access andthe modern design put the 8086 compatible processor with 2 MIPS in the same performance class as the 20286 and 80386SX computers. The user has the free choice of the largest software stock in the world. With the PLC programming systems which are available, LogiCAD, Festo FST and PLC emulator, the CPU module can also be programmed and used like a PLC. Due to decoupling from the PC/XT bus of thebusboards, the CPU modules become capable of multiprocessing and can be operated in master/slave mode with other E.IPC-HC1X CPU modules. Here the I²C bus with a transfer rate of up to 90 KBit/s controls communication between the master and slave modules or between external customer-specific I²C modules. Several FESTO IPC concepts can be linked via the external I²C bus within one device or one...
Leer documento completo
Regístrate para leer el documento completo.