Frac hid

Holditch Peer Reviewed Journal Articles 1973 - 2008
Peer Reviewed Publications:
Holditch, Stephen A. and Chianelli, Russell R.: “Factors That Will Influence Oil and Gas Supply and Demand in the 21st Century”, MRS Bulletin, Volume 33, April 2008, Harnessing Materials for Energy. Holditch, S. A.: “Tight Gas Reservoirs”, Distinguish Author Article, Journal of Petroleum Technology, (May 2006)Rahim, Z., Holditch, S. A., Zuber, M. D., and Buehring, D.: “Evaluation of Fracture Treatments Using a Layered Reservoir Description: Field Examples,” SPE Production & Facilities (February 1998) 21-27. Voneiff, G. W., Robinson, B., M., and Holditch, S. A.: “The Effects of Unbroken Fracture Fluid On Gas Well Performance”, SPE Production & Facilities, November 1996, 223-229. Yao, C. Y., and Holditch, S.A.: “Reservoir Permeability Estimation from Time-Lapse Log Data”, SPE 25513, SPE Formation Evaluation, (June 1996) 69-74, Yong, F. and Holditch, S. A.: “Use of Volumetric-Average Shear Rate to Test Crosslinked Fluids with the Fann 50 Viscometer,” SPE Production and Facilities, August 1995, 191-196. Rahim, Z. and Holditch, S. A.: “Using a Three-Dimensional Concept in a TwoDimensional Model toPredict Accurate Hydraulic Fracture Dimensions,” J. Petroleum Science & Engineering (1995) 13, 15-27. Rahim, Z. and Holditch, S. A.: “The Effects of Mechanical Properties and Selection of Completion Interval Upon the Created and Propped Fracture Dimensions in Layered Reservoirs,” J. Petroleum Science & Engineering (1995) 13, 29-45. Rahim, Z. and Holditch, S. A.: “Effects of Fracture Fluid Degradationon Underground Fracture Dimensions and Production Increase,” submitted for publication to Journal of Petroleum Science & Engineering (1995). Rahim, Z., Holditch, S. A., Zuber, M. D., and Buehring, D.: “Evaluation of Fracture Treatments Using a Layered Reservoir Description: Field Examples,” Journal of Petroleum Science & Engineering (March 1995) 12, No. 4, 257-267. Xiong, H. and Holditch, S. A.:“Investigation Into the Application of Fuzzy Logic to Well Stimulation Treatment Design,” SPE Computer Applications, (Feb. 1995) 18-24. Holditch, S. A. and Rahim, Z.: "Developing Data Sets for Three-Dimensional Fracture Propagation Models," SPE Production and Facilities (Nov. 1994) 257-261.

Voneiff, G. W. and Holditch, S. A.: “Economic Assessment of Applying Recent Advances in FracturingTechnology,” Journal of Petroleum Technology (Jan. 1994) 51-57, Distinguished Author Series. Ning, W., Fan, J., Holditch, S. A. and Lancaster, D. E.: "Measurement of Shale Matrix and Fracture Properties in Naturally Fractured Cores Using Pulse Testing," Gas Shales Technology Review (Oct. 1993) 8, no. 2, 31-45. Holditch, S. A.: "Completion Methods in Coal Seam Reservoirs," Journal of Petroleum Technology,March 1993, 270-276. Rollins, J. B., Holditch, S. A., and Lee, W. J.: "Characterizing Average Permeability in Oil and Gas Formations," SPE Formation Evaluation, March 1992, 99-105. Holditch, S. A. and Blakeley, D. M.: "Flow Characteristics of Hydraulic Fracture Proppants Subjected to Repeated Production Cycles," SPE Production Engineering (Feb. 1992) 15-20. Robinson, B. M., Holditch, S. A.,Whitehead, W. S., and Peterson, R. E.: "Hydraulic Fracturing Research in East Texas: Third GRI Staged Field Experiment," Journal of Petroleum Technology (Jan. 1992) 78-87. Tobola, D. P. and Holditch, S. A.: "Determination of Reservoir Permeability From Repeated Formation Logging," SPE Formation Evaluation (March 91) 20-26. Holditch, S. A., Robinson, B. M., Ely, J. W., and Rahim, Z.: "The Effect ofViscous Fluid Properties on Excess Friction Pressures Measured During Hydraulic Fracture Treatment," SPE Production Engineering (Feb. 1991) 9-14. Whitehead, W. S., Gatens III, J. M., and Holditch, S. A.: "Determination of In-situ Stress Profiles Through Hydraulic Fracturing Measurements in Two Distinct Geologic Areas," International Journal of Rock Mechanics and Mining Sciences, Vol. 26, no. 6,...