Gerencia

Product Name: TOYOTA GENUINE MOTOR OIL 5W-30
Revision Date: 13 May (abbr.) 2009
Page 1 of 9 ______________________________________________________________________________________________________________________

MATERIAL SAFETY DATA SHEET
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT Product Name: TOYOTA GENUINE MOTOR OIL 5W-30 Product Description: Base Oil and Additives Product Code:471664-00, 977532 Intended Use: Engine oil COMPANY IDENTIFICATION Supplier:

EXXON MOBIL CORPORATION 3225 GALLOWS RD. FAIRFAX, VA. 22037 USA 24 Hour Health Emergency 609-737-4411 Transportation Emergency Phone 800-424-9300 ExxonMobil Transportation No. 281-834-3296 Product Technical Information 800-662-4525, 800-947-9147 MSDS Internet Address http://www.exxon.com, http://www.mobil.comSECTION 2

COMPOSITION / INFORMATION ON INGREDIENTS

No Reportable Hazardous Substance(s) or Complex Substance(s). SECTION 3 HAZARDS IDENTIFICATION

This material is not considered to be hazardous according to regulatory guidelines (see (M)SDS Section 15).

POTENTIAL HEALTH EFFECTS Low order of toxicity. Excessive exposure may result in eye, skin, or respiratory irritation. High-pressureinjection under skin may cause serious damage.

NFPA Hazard ID: HMIS Hazard ID:

Health: Health:

0 0

Flammability: 1 Flammability: 1

Reactivity: 0 Reactivity: 0

NOTE: This material should not be used for any other purpose than the intended use in Section 1 without expert advice. Health studies have shown that chemical exposure may cause potential human health risks which may vary fromperson to person. SECTION 4 FIRST AID MEASURES

INHALATION Remove from further exposure. For those providing assistance, avoid exposure to yourself or others. Use adequate respiratory protection. If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek immediate medical assistance. If breathing has stopped, assist ventilation with a mechanical device or use

Product Name:TOYOTA GENUINE MOTOR OIL 5W-30
Revision Date: 13 May (abbr.) 2009
Page 2 of 9 ______________________________________________________________________________________________________________________

mouth-to-mouth resuscitation. SKIN CONTACT Wash contact areas with soap and water. If product is injected into or under the skin, or into any part of the body, regardless of the appearance of thewound or its size, the individual should be evaluated immediately by a physician as a surgical emergency. Even though initial symptoms from high pressure injection may be minimal or absent, early surgical treatment within the first few hours may significantly reduce the ultimate extent of injury. EYE CONTACT Flush thoroughly with water. If irritation occurs, get medical assistance. INGESTION First aidis normally not required. Seek medical attention if discomfort occurs.

SECTION 5

FIRE FIGHTING MEASURES

EXTINGUISHING MEDIA Appropriate Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames. Inappropriate Extinguishing Media: Straight Streams of Water FIRE FIGHTING Fire Fighting Instructions: Evacuate area. Prevent runoff from fire control ordilution from entering streams, sewers, or drinking water supply. Firefighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA). Use water spray to cool fire exposed surfaces and to protect personnel. Hazardous Combustion Products: Smoke, Fume, Aldehydes, Sulfur oxides, Incomplete combustion products, Oxides of carbon FLAMMABILITYPROPERTIES Flash Point [Method]: 220C (428F) [ ASTM D-92] Flammable Limits (Approximate volume % in air): LEL: 0.9 Autoignition Temperature: N/D SECTION 6

UEL: 7.0

ACCIDENTAL RELEASE MEASURES

NOTIFICATION PROCEDURES In the event of a spill or accidental release, notify relevant authorities in accordance with all applicable regulations. US regulations require reporting releases of this material...