Historia De Mexico

Futura 2 sewing machine.model 920.two way swing surface

Principal parts and what they do

1.console cover protects against dust, is hinged for easy accses to controls.

2.stitch-width dial controls zig-zag stitch width and positions the needle for straigth stitching andbobbin winding.
.to set, turn dial to desired setting.use settingfor straigth stitching and bobbin winding.
3.needle-position ring places needle in either .left., .center.,or .right
Stitching position.
.to set needle position,turn ring to setting desired.use .center. position for straight stitching and bobbin winding.
4.take-up lever controls flow of needle thread.self-threading eyelet simplifies and speeds threading of machine. Hsaenclosed eyelet for chainstitching .
5.preesure dial regulates presser-foot presure on fabric.it has a general-purpose sewing settings plus settings for extra-light and for darning.
.to increase pressure, lower presser foot and turn dial form toward max.
.to decrease pressure,lower presser fot and turn dial form toward darn.
.for darning,lower presser foot and set dial on dran.
6.tensiondiscs, controlled by the tensión dial, regulate the anount of tensión on your needle thread.
7.tension dial lets you select just the right tensión for your stitch, thread and fabric.the numbers eliminate guesswork in duplicating settings.
.to increase tensión,turn dial to a higher number
.to increase tensión,turn dial to a lower number.
8.buttonhole lever sets the machine for buttonholing.to set,pull lever down and press it toward you.see page 37.
9.tread retainer hols needle thread end with just the right amount ot tensión for winding the bobbin.
10.presser foot hols fabric against fed.presser feet snap off for quick removal.
11.soft-touch feed moves fabric under presser foot.soft surface does not injure fabric,even the most delicate.
12.zig-zag plate secured bymagnets.guidelines on right and left sides help you keep seams straight.
13.transparent bobbin shows threadsupply.
14.bobbin latchallows you to switch form sewing to bobbin winding without removing bobbin.
15.pattern-selector realse lever unlocks the pattern selector and raises the needle above the fabric,making stitch selection safe and efforless.
.to set ,turn lever clockwinse until it locks,turn hand Wheel slightly and reset.
16.pattern selector controls pointer on stitch panel,can be set to produce either a somooth straight stitch, decorative or practical zig-zag stitch,a strech stitch,abuttonhole, or a bastin stitch.
.to select a stitch,set pattern-selector realse lever .15. and turn pattern selector until pointer on panelis above the desired stitch setting.
17.discholder holds any one of the interchangeable stitch-pttern discs.raise it, and the disc comes up for easy removal. To insert a disc,place on holder and press down until it snaps in place.
18.pattern-start indicator,when matched with the pattern-start symbol . .,lets you start stitching at the beginning of a stitch-pattern unit. The i son each interchangeable stitch-pattern disc. When usinga built-in pattern,match the indicator to the on the disc holder.
19.hand wheelcontrols movement of take-up lever and needle.always turn it toward you.
20.stitch-balance dial adjusts balance of flexi-stitch patterns and buttonholes.
21.stitch-pattern panel pictures stitches and allows for quick selection.color identifies stitch type. White for fashion stitches.yelow for flexi-stitch...