Hoja tecnica
Páginas: 3 (652 palabras)
Publicado: 15 de junio de 2010
TSS
BoPP transparent film, both sides heat sealable, treated
Treated heat sealable layer OPP core Heat sealable layer (MST=105°C)
PROPERTIES • Heat sealable on both sides • Good mechanicalproperties • Good moisture barrier • Good antistatic and slip properties TYPICAL APPLICATIONS • Rotogravure and flexographic printing • Lamination • Single web structure Hffs and vffs packaging Generalwrapping
ROLL SIZE AVAILABILITY*
Film Standard Length (m) 4x ** (m) 7x (m)
TSS 15 TSS 18 TSS 20 TSS 25 TSS 30 TSS 35 TSS 40 TSS 48 Outside diameter – core 76 mm Outside diameter - core 152 mm4,250 3,550 3,200 2,550 2,100 1,800 1,600 1,350 305 mm 337 mm
17,000 14,200 12,800 10,200 8,400 7,200 6,400 5,400 588 mm 605 mm
29,750 24,850 22,400 17,850 14,700 12,600 11,200 9,450
783 mm*Regional availability of roll sizes (multiples of standard length)-please refer to the corresponding Sales Representative **Length rolls on 152 mm cores will be produced with reduced length inEurope to maintain roll diameters below 600 mm
TSS
Properties Method Unit
µm Internal method g/m2 m2/kg N/mm2 ASTM D882 DIN 53455 % N/mm2 ASTM D1003 ASTM D2457 DIN 53375 ASTM D1894 OPMA TC4(a)Internal method Internal method 130°C ;0.5 s ASTM D2578 ASTM F1249 (38°C - 90% RH) % °C g/cm mN/m g/m2d 9.0 7.8 7.0 % Gloss Unit NT/NT MD TD NT/NT 170 MD TD MD TD MD TD 2.0
Ref.
15 13.7 73.3 18 16.461.0 20 18.2 54.9
Typical values
25 22.8 44.0 30 27.3 36.6 35 31.9 31.4 40 36.4 27.5 48 43.7 22.9
Nominal thickness Unit weight Yield Tensile strength Elongation at break Elastic modulus HazeGloss (45°) Dynamic cof Thermal shrinkage Heat seal range Seal strength Treatment level Water vapour permeability
140 280 180 50 2000 3800 2.3 85 0.25 6.0 3.0 105 ÷ 140 230 36 ÷ 39 6.0 5.0 4.0 3.53.1 300 2.6
Tolerance
≤ 1.000 kg ± 20% ± 10% ± 5%
Weight
1.001-10.000 kg > 10.000 kg
STORAGE, HANDLING AND APPLICATION
TSS does not require special storage conditions. A storage...
BoPP transparent film, both sides heat sealable, treated
Treated heat sealable layer OPP core Heat sealable layer (MST=105°C)
PROPERTIES • Heat sealable on both sides • Good mechanicalproperties • Good moisture barrier • Good antistatic and slip properties TYPICAL APPLICATIONS • Rotogravure and flexographic printing • Lamination • Single web structure Hffs and vffs packaging Generalwrapping
ROLL SIZE AVAILABILITY*
Film Standard Length (m) 4x ** (m) 7x (m)
TSS 15 TSS 18 TSS 20 TSS 25 TSS 30 TSS 35 TSS 40 TSS 48 Outside diameter – core 76 mm Outside diameter - core 152 mm4,250 3,550 3,200 2,550 2,100 1,800 1,600 1,350 305 mm 337 mm
17,000 14,200 12,800 10,200 8,400 7,200 6,400 5,400 588 mm 605 mm
29,750 24,850 22,400 17,850 14,700 12,600 11,200 9,450
783 mm*Regional availability of roll sizes (multiples of standard length)-please refer to the corresponding Sales Representative **Length rolls on 152 mm cores will be produced with reduced length inEurope to maintain roll diameters below 600 mm
TSS
Properties Method Unit
µm Internal method g/m2 m2/kg N/mm2 ASTM D882 DIN 53455 % N/mm2 ASTM D1003 ASTM D2457 DIN 53375 ASTM D1894 OPMA TC4(a)Internal method Internal method 130°C ;0.5 s ASTM D2578 ASTM F1249 (38°C - 90% RH) % °C g/cm mN/m g/m2d 9.0 7.8 7.0 % Gloss Unit NT/NT MD TD NT/NT 170 MD TD MD TD MD TD 2.0
Ref.
15 13.7 73.3 18 16.461.0 20 18.2 54.9
Typical values
25 22.8 44.0 30 27.3 36.6 35 31.9 31.4 40 36.4 27.5 48 43.7 22.9
Nominal thickness Unit weight Yield Tensile strength Elongation at break Elastic modulus HazeGloss (45°) Dynamic cof Thermal shrinkage Heat seal range Seal strength Treatment level Water vapour permeability
140 280 180 50 2000 3800 2.3 85 0.25 6.0 3.0 105 ÷ 140 230 36 ÷ 39 6.0 5.0 4.0 3.53.1 300 2.6
Tolerance
≤ 1.000 kg ± 20% ± 10% ± 5%
Weight
1.001-10.000 kg > 10.000 kg
STORAGE, HANDLING AND APPLICATION
TSS does not require special storage conditions. A storage...
Leer documento completo
Regístrate para leer el documento completo.