Home

Taller de impresoras

DeskJet 695C/695Cci/697C - External Case Parts
  |
REF | PART NUMBER | DESCRIPTION |
1 | C6417-40001 | Top cover - Main upper housing with molded input tray - Does NOT include cartridge access cover |
2 | C6417-40002 | Ink Cartridge Access Cover Assy - Lift-Up Top/Front Cover |
3 | C6417-40003 | I/O cover - Allows access to logic PCA I/O port connector |
4 |C6417-60004 | Keypad Assembly - Includes Power and 'Resume' Switches, Plus 'Power' and 'Status' LED Displays |
5 | C4562-60002 | Paper length adjustment stop - Holds paper against leading edge of loading mechanism - Medium purple |
6 | C4549-60003 | Paper Output Tray - Includes Left and Right Wings - Has Slot Used to Feed Single Envelopes Into Unit - Flint Gray |
7 | C4562-40029 | DeskJet 695CciNameplate - Attached to Ink Cartridge Access Cover Assembly |
| C6417-40004 | DeskJet 695C Nameplate - Attached to Ink Cartridge Access Cover Assembly |
| C6417-40009 | DeskJet 697C Nameplate - Attached to Ink Cartridge Access Cover Assembly |
|

DeskJet 695C/695Cci/697C - Print Mechanism Assembly
  |
REF | PART NUMBER | DESCRIPTION |
1 | C2124-60116 | Lower Pinch Roller (3 Used) - Mounts Belowthe Pivot Assembly in the Print Mechanism Assembly - Must Be Replaced Only by Trained, Experienced Service Personnel |
2 | C2124-60190 | Service station stepper motor (does not include cable) - Moves the rack vertically in the service station assembly |
3 | C2124-80008 | Encoder Strip (Clear Strip with Position Marks) - Used by the Sensor in the Carriage Assembly to Determine Position |
4 |C2162-40105 | Switch lever - Actuates access door (Open) switch |
5 | C4562-20003 | Idler pulley axel - Dowel pin for idler pulley |
6 | C2162-40016 | Idler hub - Drive belt pivot point on left side of chassis |
7 | C2164-40060 | Carriage belt |
8 | C2162-60006 | Carriage Motor Assembly (Includes Cable) - Drives the Carriage Belt (Moves the Print Cartridges Across the Paper) |
9 | C2162-40002 |Cluster Gear - on Left Side - Driven by Paper Advance Motor |
10 | C2162-60009 | Cable Assembly - From the Main Logic Board to the Service Station and Paper Feed Stepper Motors (2 Used) |
11 | C4562-40009 | Paper Width Adjuster Cap - Identifies Slider Position in Reference to the Width of Media in Input Tray - Medium Purple |
| C4562-60046 | Paper width adjustment stop assembly - Adjusts forinput paper width - Has medium purple cap |
12 | C6450-60102 | Service station sled assembly - Mounts on top of the service station - Performs capping and wiping functions for the print cartridges |
13 | C4562-60045 | Service Station Assembly (Includes Motor) - Mechanical Assembly That Moves the Service Station Sled |
14 | C2124-00009 | Spring - Installed in Spittoon Assembly |
15 |C2124-20001 | Rear Rail - Helps Support Carriage Assembly |
16 | C2164-00015 | Shaft Retainer Clip - Holds Rod That the Carriage Rides on In Left Side of Printer Mechanism |
17 | C2164-60045 | Paper Stepper Motor Assembly (Does NOT Include Cable) - Drives Mechanisms for Movement of Media in the Printer |
18 | C6450-40011 | Holds Ink Expelled From Cartridge During Refresh Cycle |
19 | C6450-80052 |Spittoon sponge - Located in bottom of spittoon |
20 | C4549-60036 | Pressure Plate Assembly - Holds media to be printed against the Paper Input Feed Rollers |
21 | C2162-67806 | Preloader - Applies downward pressure on drive shaft |
22 | C2170-40002 | Envelope Sensor - Small Plastic Item Mounted on the Paper Guide Assembly - Used to Prevent Ink Smearing on Envelopes |
23 | C4562-69047 | PrintMechanism Assembly - Complete Mechanism With Carriage Movement, Paper Picking and Service Station Operations - Not for DeskJet 695Cci |
24 | C2124-60162 | Upper Pinch Roller and Spring Assembly - Installed in Paper Guide Assembly (3 Used) |
25 | C2162-20004 | Pivot Spring - Attaches to Mechanism Chassis - Provides Tension for Pivot to Return to Upright Position |
26 | C2128-60018 | Separator Pad...