Honeyywell

Model 43 Precision Low Profile Load Cell
Order Code AL112 n 5 to 500,000 lb. n mV/V Output n Stainless Steel n Double Diaphragm Design n 0.10% Accuracy
3 Clearance Holes for F Socket HD Cap Screws, Equally Spaced as Shown on G Diameter B.C.

Wiring Code
Connector/ Unamplified (Std.) C A B C D E F (+) Excitation (+) Excitation (-) Excitation (-) Excitation (-) Output (+) Output

SphericalRadius 0.18 in. H øD2 A B

øD1

Dimensions
Ranges (lb.) 5; 10; 25 50; 100; 250; 500; 1000 2000; 3000; 4000; 5000 7500; 10,000; 15,000; 20,000; 30,000 50,000; 75,000; 100,000 150,000; 200,000 300,000 400,000 500,000 D1 (in.) 2.50 3.00 (note 1) 3.50 4.50 4.50 5.50 7.00 7.50 11.00 D2 (in.) 0.37 0.56 0.69 1.50 1.50 2.00 2.50 2.50 4.75 H (in.) 0.98 1.18 1.18 2.00 2.00 2.18 2.68 2.68 4.50

F øG(in.) Typ.Dia. B.C. #8 1/4 5/16 3/8 3/8 3/8 3/8 3/8 3/4 2.000 2.250 2.625 3.790 3.790 4.812 6.000 6.750 9.500

A (in.) 0.82 0.82 0.82 1.25 1.25 1.25 1.25 1.25 1.25

A* (in.) 2.5 2.5 2.5 2.3 2.3 2.3 2.3 2.3 2.3

B (in.) 0.75 0.75 0.75 1.50 1.50 1.50 1.50 1.50 1.50

B* (in.) 0.90 0.90 0.90 1.50 1.50 1.50 1.50 1.50 1.50

C (in.) 1.25 1.25 1.25 2.00 2.00 2.00 2.00 2.00 2.00

* Length of loadcell with amplified option (see options chart)

Performance

Load Ranges................5 to 500,000 lb. Non-Linearity 5 to 25 lb.................+/- 0.2% Full Scale 50 to 500,000 lb.................+/- 0.1% Full Scale Hysteresis 5 to 25 lb.................+/- 0.1% Full Scale 50 to 500,000 lb.................+/- 0.08% Full Scale Non-Repeatability 5 to 25 lb.................+/- 0.1% Full Scale50 to 500,000 lb.................+/- 0.03% Full Scale Output (tolerance) 5 to 25 lb.................2 mV/V +/- 0.5% Full Scale 50 to 500,000 lb.................3 mV/V +/- 0.5% Full Scale Operation................Compression Resolution................Infinite Standard Calibration................5 point calibration, compression only Temperature, Operating................-65° to 250° F Temperature,Compensated................60° to 160° F Temperature, Effect Zero................0.002% Full Scale/ °F Span................0.002% Full Scale/ °F

Environmental

1-888-282-9891

www.honeywell.com/sensotec

159

Model 43 Electrical
Strain Gage Type................Bonded Foil Excitation (calibration)................10 VDC Excitation (acceptable)................Up to 15 VDC or ACInsulation Resistance................5000 Megohms @ 50 VDC Bridge Resistance (tolerance)................350 Ohms Zero Balance (tolerance)................+/- 1% Full Scale Shunt Calibration Data................Included Electrical Termination (std) 5 to 5,000 lb.................PTIH-10-6P 7,500 to 500,000 lb.................MS3106A-14S-6S Mating Connector (not incl.) 5 to 5,000 lb.................PT06A-10-6S7,500 to 500,000 lb.................MS3106A-14S-6S Maximum Allowable Load................150% F.S. (note 2) Weight................See table Material................17-4PH Stainless Steel Life Cycles (approx.)................> 10 million cycles Deflection................See table Natural Frequency................See table

Mechanical

Deflections and Ringing Frequencies
Deflection @ FullScale (in.) 0.001 0.002 0.002 0.003 0.004 0.004 0.005 0.007 0.007 Ringing Frequency (Hz) 2,000 4,500 11,000 9,000 13,000 11,000 10,000 8,400 4,800 Weight (lb) 0.8 1.5 1.6 6.4 6.6 11.7 23.8 26.5 90.4

Capacity (lb.) 5 to 25 50 to 1,000 2,000 to 5,000 7,500 to 30,000 50,000 to 100,000 150,000 to 200,000 300,000 400,000 500,000

Typical System Diagram
Customer Supplied Chart Recorder Alarm PanelData Acquisition Computer PLC

Model 43

Mating Connectors & Cables PT06A-10-6S, Std. PT06E-10-6S MS3106A-14S-6S In-Line Amplifiers (Used with unamplified units only) Display Units SC500 SC1000 SC2000 SC2001 SC3004 GM (Unamp. only) GM-A (Amp. only) NK (Unamp. only) HH (Unamp. only) Amplifier Output Universal In-Line Amplifiers UV +/- 5 VDC UV-10 +/- 10 VDC 0 +/- 5 VDC UBP U3W 4-20 mA (3 wire)...