How-To Gendt08 Sk Private 10.Pdf
Thanks to Blinky123 for the original version: HOW TO FOR USING GENDT08 WITH A 301.doc
Thisdocument explains how to prepare an IRD and ROM10 card image using private numbers for CEMU emulation software. It is recommended to try this only if you have been successful in getting your system upand running 100% with public numbers first. The illustrations used show public numbers. Stuff you will need: Software Gendt08 3.3 jKeys 2.x FlashEdit 2.x Hardware JTAG Reader/Writer
There are 2things that need to be prepared before you start. 1 – Your TSOP’s firmware must be at the latest revision, your original IRD numbers and Box Keys are on them and you have a back-up of both U22 and U23TSOPs. Use jKeys and a JTAG to backup your TSOPs. 2 – Your rom10 image (Dish.bin or Bev.bin) must be a working image. Start with one you are sure works with public numbers.
1
Open Gendt08 v3.3,your screen should look like this.
2
Prepare for SK mode.
Select Use IRD Secondary Key Uncheck FF out old Ird Number/Boxkeys
3
Load Flash 1 - U22 – TSOP
Click the folder button andlocate your TSOPs. Open Flash 1 - U22 first.
4
Load Flash 2 - U23 – TSOP
After loading Flash 1 – U22 you now have a second Filename box. Click the folder button and load Flash 2 – U23.
5TSOPs Loaded
If the App checksum is red click on the Fix button to correct it.
6
Verify that your IRD Number and Box Keys are correct.
7
You are now ready to open your ROM10image.
Click on the “Card Information” tab.
8
ROM10 image
Select Rom10 Click on the folder icon to select your .bin file.
9
Locate your .bin image.
Change Files of type: to Binaryimage. Find your Bev.bin or Dish.bin and click Open.
10
Your .bin image is now opened in Gendt08.
Enter your Cam ID. Edit to your Zip Code and Time Zone if you like. It isn’t necessary as...
Regístrate para leer el documento completo.