How to make biodisel

Biodiesel - How to make biodiesel fuel from used cooking oil

Biodiesel is a fuel that can be used directly in any diesel engine generally without modification. It's viscosity is twice that of regular diesel fuel which means it is better at lubricating your diesel engine than regular diesel. And... emissions are cut dramatically vs using standard diesel fuel. You can buy Biodieselalready made. Your other option is to make it yourself using your own homemade equipment or by purchasing something like a Fuelmeister biodiesel processor. It costs $2995, but it comes with everything you need to make many, many gallons of biodiesel fuel. One other option is to burn straight vegetable oil (SVO) in your diesel engine. To do this, you must do three things: 1) You must pre-heat yourvegetable oil including the storage tank and all feed lines, 2) You must start your engine using regular diesel or biodiesel, and 3) You must clean your system by burning only regular diesel or biodiesel before shutting the engine off. I don't recommend the SVO method because there is the possibility of carbon buildup in the long run and that may damage your engine. Here are the instructions on makingyour own biodiesel...

WARNING!!!! - Methanol is flammable and toxic. Do not let it touch your skin or get in your eyes. Wear proper protective gloves, clothing, and eyewear at all times. Same thing with ethanol. Lye is also very caustic - do not allow it to touch your skin or clothing. When you mix the lye with the alcohol, it creates an even more toxic substance and toxic fumes which youshould be very careful with - do not come into contact with it in any way. Always be in a well ventilated area. Also... you are 100% responsible for your own safety. The author is not responsible in any way whatsoever for personal injury or damage to your engine.

Here is a general description of how to make biodiesel fuel using methanol, lye, and used cooking oil. This process is calledtransesterification.You can buy methanol from your local racetrack or chemical supply store. You can buy granulated lye (sodium hydroxide) from your local grocery store or hardware store. Make sure you filter the used cooking oil before using. Fry oil filters can be purchased in any good restaurant supply store. The oil also must be warmed up so it is not solid or lumpy or thick. You can use the sun toheat the oil or some kind of water heating element or a electric or gas burner of some sort. The ideal temperature is 120° F. If you are using flames, remember that the methanol is extremely flammable and you should turn your burner off before getting the methanol mixture anywhere near it. Of course, this should all be done in a well ventilated area too.
Hint: to determine the amount of lyeneeded to start the transesterification process to make biodiesel, do a small test batch first. You don't want to mix up a large batch only to find out that you did not use enough lye. Some used cooking oils may contain different amounts of animal fats. The more animal fat in the vegetable oil, the more lye you need to start the process. Start with just 1 liter of oil and 200 milliliters (1/5th of aliter) of methanol and 4.5 grams of lye. First, mix the lye in with the methanol until dissolved (this creates sodium methoxide - very, very caustic - be careful). Then mix the sodium methoxide with the vegetable oil and mix for 1 hour. After mixing, let it settle for an hour or two and it should form two distinct layers of biodiesel (top) and glycerin (bottom). If there are not two distinctlayers, repeat the whole process with 5.5 grams of lye.

You can also perform what is called a titration... Dissolve 1 gram of lye into one liter of distilled water and dissolve 1 milliliter of vegetable oil into 10 ml of isopropyl alcohol. Then drop the diluted lye into the diluted vegetable oil one ml at a time. After each ml, measure the pH of the diluted vegetable oil with litmus paper or...