Impresoras

English

TM-U200 Series
User’s Manual / Bedienungsanleitung Gebruikershandleiding / Manuel d’utilisation Manual do utilizador / Manual del usuario Manuale dell’utente

401391300

TM-U200 Series User’s Manual -1

Printer Parts

2 1
Type A Type B and two color Type D

3
Single color Type D

DIP Switch Tables
Serial
SW 1-1 1-2 Function Data reception error Receive buffer capacityON Ignored 40 bytes OFF Prints”?” ANK Model: 1000 bytes Multilingual model: 512 bytes DTR/DSR 8 bits No Odd 9600 bps BUSY when offline or receive buffer full 40/33 2-1 Print column selection 7 × 9 font/ 9 × 9 font

Parallel
SW 1-1 1-2 Function Auto line feed Receive buffer capacity ON Enabled 40 bytes OFF Disabled ANK Model: 1000 bytes Multilingual model: 512 bytes

1-3 1-4 1-5 1-6 1-7 1-8Handshaking Word length Parity check Parity selection Baud rate Busy condition

XON/XOFF 7 bits Yes Even 4800 bps BUSY when receive buffer is full 42/35

1-3- Undefined 1-7 1-8 Busy condition BUSY when receive buffer is full 42/35 BUSY when offline or receive buffer full 40/33

2-2 2-3

Internal use. Do not change. Type A Internal use. Do not change. Types B & D Undefined.

2-1Print column selection 7 × 9 font/ 9 × 9 font

2-4

Type A Undefined. Types B & D Pin 31 reset signal Enabled Disabled

2-2 2-3

For internal use. Do not change. Type A For internal use. Do not change. Types B & D Pin 6 reset signal Enabled Disabled

2-5, For internal use. Do not change. 2-6 2-7 Type A Undefined. Types B & D Internal use. Do not change. 2-8 Type A Pin 31 reset signal EnabledDisabled

2-4

Type A Undefind. Types B & D Pin 25 Enabled reset signal Disabled

2-5, For internal use. Do not change. 2-6 2-7 Type A Pin 6 reset Enabled signal Disabled

Types B & D Undefined.

Types B & D For internal use. Do not change 2-8 Type A Pin 25 reset signal Enabled Disabled

Types B & D Undefined.

English
All rights reserved. No part of this publication may bereproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has been taken in the preparation of this book, Seiko Epson Corporationassumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of thisproduct or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products orEpson Approved Products by Seiko Epson Corporation. EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation. NOTICE: The contents of this manual are subject to change without notice. Copyright © 2001 by Seiko Epson Corporation, Nagano, Japan.

EMC and Safety Standards Applied
Printer
Product Name: TM-U200A/TM-U200B/TM-U200D Model Name: M119A/M119B/M119D The following standards areapplied only to the printers that are so labeled. (EMC is tested using the packaged AC adapter and PS-170.) Europe: CE marking Safety: EN 60950 North America: EMI: FCC/ICES-003 Class A Safety: UL 1950/CSA C22.2 No. 950 Japan: EMC: VCCI Class A Oceania: EMC: AS/NZS 3548 Class B Taiwan: EMC: Class B

CE Marking
The printer conforms to the following Directives and Norms: Directive 89/336/EEC EN...