Información General
3208 MARINE ENGINE
Maintenance Intervals
Excerpted from Operation & Maintenance Manual (SEBU6090-03-01)
© 2007 Caterpillar All Rights Reserved
56 Maintenance Section Maintenance Interval Schedule
i00917973
Maintenance Interval Schedule
SMCS Code: 1000; 7500 Note: Ensure that the Safety Information, warnings, and instructions are read and understood before operation ormaintenance procedures are performed. Before each consecutive interval is performed, all of the maintenance requirements from the previous interval must also be performed. Note: For engines that are equipped with AIRSEP® engine air cleaners, the turbocharger should be inspected every 1000 service hours.
Fuel System Primary Filter/Water Separator Element - Replace............................................................. 88 Fuel System Secondary Filter - Replace .............. 89 Fuel Tank Water and Sediment - Drain ................. 91 Hoses and Clamps - Inspect/Replace .................. 93 Magnetic Pickups - Clean/Inspect ........................ 94 Oil Fumes Filter - Replace .................................... 95 Sea Water Strainer - Clean/Inspect .................... 100
Every 36 000L (9000 US gal) of Fuel or 1000 Service Hours or 2 Years
Aftercooler Core - Clean/Test ............................... Cooling System Coolant (DEAC) - Change .......... Cooling System Water Temperature Regulator Replace ............................................................... Engine - Clean ...................................................... Governor Housing - Drain..................................... Marine Transmission Oil Cooler - Clean/Inspect .. PCV Valve - Inspect .............................................. 57 62 69 71 92 94 99
When Required
Belt - Inspect/Adjust/Replace ................................ Battery - Recycle .................................................. Battery or Battery Cable - Disconnect .................. Engine Oil Level Gauge - Calibrate...................... Fuel System - Prime ............................................. 59 61 62 78 87
Every 72 000 L (19 000 US gal) of Fuel or 2000 Service Hours
Alternator - Inspect ............................................... 58 Crankshaft Vibration Damper - Inspect ................. 70 Engine Mounts - Inspect ....................................... 77 Engine Valve Lash - Inspect/Adjust...................... 84 Fuel Injection Nozzles - Test/Exchange ................ 86 Fuel Ratio Control - Inspect/Adjust ....................... 87 Heat Exchanger - Inspect ..................................... 92 Starting Motor - Inspect ...................................... 101 Turbocharger - Inspect ........................................ 101
Daily
Cooling System Coolant Level - Check................ 66 Engine Air Cleaner Service Indicator - Inspect ..... 75 Engine Oil Level - Check ...................................... 77 Fuel System Water Separator - Drain ................... 90 Marine Transmission Oil Level - Check ................ 95 Walk-Around Inspection ...................................... 102
Every 1900 L (500 US gal) of Fuel or 50 Service Hours
Aftercooler Drain Plug - Inspect............................ 57 Engine Air Cleaner Element (Foam) Clean/Replace .................................................... 71 Zinc Rods - Inspect/Replace ............................... 104
Every 108 000 L (28 500 US gal) of Fuel or 3000 Service Hours or 2 Years
Cooling System Coolant Extender (ELC) - Add .... 66 Water Pump - Inspect ......................................... 103
Every114 000 L (30 000 US gal) of Fuel
Overhaul Considerations ...................................... 96
Initial 9000 L (2400 US gal) of Fuel or 250 Service Hours or 1 Year
Engine Valve Lash - Inspect/Adjust ...................... 84
Every 216 000 L (57 000 US gal) of Fuel or 6000 Service Hours or 4 Years
Cooling System Coolant (ELC) - Change ............. 64
Every 9000 L (2400 US gal) of Fuel or...
Regístrate para leer el documento completo.