Ing Civil

VI.BE.MAC. Spa

UNIT 2261H

MAINTENANCE OPERATOR

MANUAL FOR THE OPERATOR EMPLOYED TO THE MAINTENANCE INTRODUCTION
Thanks for the porpoise of this industrial sewing machine made by VI.BE.MAC. S.p.A. Before beginning to operate with this automatic unity, it is request to read this manual, so that it to help you to understand the operation of the unit. They will illustrate to them themethod of job to follow in the respect of the current regulations.

· ·

No part of this manual may be copied or reproduced without the permission of VI.BE.MAC. S.p.A. The contents of this manual may be subject to change without notice.

Should you require an additional manual, or further clarification regarding general or technical information given in this manual, please contact us:TECHNICAL OFFICE VI.BE.MAC. S.p.A. Via Monte Pastello 7/ I 37047 S.GIOVANNI LUPATOTO (VERONA) Telephone +39 045 8778151 Fax +39 045 8779024 Email: vibemac@vibemac.com http:// www.vibemac.com "Any comments and/or suggestions which might serve to improve this manual will be gratefully received”.

1

VI.BE.MAC. Spa

UNIT 2261H

MAINTENANCE OPERATOR

INDEX
1. GENERALSPECIFICS................................................................................................................................4
1.1. SUPPLY TENSION.........................................................................................................................................................4 1.2.COMPRESSED AIRCONSUMPTION...........................................................................................................................4 1.3. DIMENSIONS .................................................................................................................................................................4 1.4. PLACE OF EMPLOYMENT ..........................................................................................................................................4

2.3.

CONDITIONS OF USE ................................................................................................................................5 DESCRIPTION INTERRUPTERS, BUTTONS IT IS COMMANDS .....................................................6
3.1.MAINSWITCH................................................................................................................................................................6 3.2.COMMAND PEDAL .......................................................................................................................................................6

4. 5. 6. 7.

SWITCH ON THE UNIT .............................................................................................................................6 STOP THE UNIT..........................................................................................................................................6 SENSE OF ROTATION ...............................................................................................................................6 MITSUBISHIMOTOR.................................................................................................................................7
7.1.SEWING UNIT ROTATION SETTING .........................................................................................................................7 7.2.NEEDLE STOP POSITION WHIT THE PEDAL IN NEUTRAL POSITION ...............................................................7 7.3.UNIT SEWING SPEED PERCENTAGESETTING.......................................................................................................7 7.4.SEWING SPEED VALUE SETTING..............................................................................................................................8 7.6.SETTING PARAMETERS OF THE LOW INERTIA DEVICE .....................................................................................9 7.7. MEMORIZING THE PROGRAMME (BACK-UP...